Have them for the 350T, 350F, 360, 500, 500, 750 as complete kits. The kits are $185 + $12 shipping, the 350T and 360 are $195 + shipping, as they have custom pivot pieces I machine for the brake side that allows you to use your stock brake rod, and light switch.
Those prices are for fixed peg. I have folding pegs as well, they are $250 for the kit, $260 for the 350T and 360.
Pics of the 350:
On the 350F
On 750F
On 360
On 500/550
Folding Pegs
All sets come with fully knurled pegs. Linkage rods are aluminum as well, with heim joints for the connectors. These rearsets are indexable, and have 2" of adjustability built into the linkage rods to fine tune your toe peg position.
I make each and every one of these, right here in the good ole USA. You may be able to find some that are a bit cheaper, but you will not find any that are better quality.
You can reach me through here, or at jarredholloway88@gmail.com
Those prices are for fixed peg. I have folding pegs as well, they are $250 for the kit, $260 for the 350T and 360.
Pics of the 350:
On the 350F
On 750F
On 360
On 500/550
Folding Pegs
All sets come with fully knurled pegs. Linkage rods are aluminum as well, with heim joints for the connectors. These rearsets are indexable, and have 2" of adjustability built into the linkage rods to fine tune your toe peg position.
I make each and every one of these, right here in the good ole USA. You may be able to find some that are a bit cheaper, but you will not find any that are better quality.
You can reach me through here, or at jarredholloway88@gmail.com