collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: Building my own two-stroke "Mongrel" - Inspired by CharlieT & TedT  (Read 29538 times)

Offline Redbird

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 4454
  • Dolor est Magister Optimus
I'm lovin this :)
When you are Dead, you don't know that you are Dead. It is difficult only for Others.

It is the same when you are Stupid.

Offline Uglyrabbit

  • Posts: 62
Radical!


Sent from my iPhone using DO THE TON

Offline BillyGoat4130

  • Posts: 179
    • Live Oak FL Real Estate
Well I got to fartin around in the yard a little too hot and heavy a few weeks ago after doing some carburetor dialing and high sided the bike. Luckily it was fairly low speed and in the grass or it coulda been kinda bad. Tweaked my new handlebars and mangled up my rear sets on each side. Tank pipe an everything else seems okay, I got a little skinned up up but my dad always says "When you're dumb you gotta be tough..."

Long story short, finally got it where it was running good and super crisp once warm. Was coming across the yard at a pretty good clip faster than I realized (I can tell this will be a problem...haha). Got onto the brakes harder than I should have and then into a little bumpy area and I washed the front end out. Totally my own stupidity and I knew better but I was having too much fun listening to the exhaust to realize how fast I was going at the time.

So, I gotta work on fixing the rear sets again.


In the interim I've been doing a lot of research and reading on trying to do my own hydroform exhaust pipe. The sectional looks awesome but mother of God is it labor and time intensive to build. I've exchanged a few emails with a guy named Martin I found on a forum that has built a ton in the UK and has basically shared information and technique on how to do it. So I'm gonna be working towards that also. The initial lay out has been the most confusing part to me and I think I have an understanding of that now. Basically after that you lay it out on sheet metal, weld the edges and pump up with a pressure washer. Here's a vide on Youtube that shows some of the process (not mine):

I hope to in the next coming few months be able to start experimenting with that. Between now and March is usually when I get more projects done in the shop so hopefully I get to spend some more time in there with Dad and continue working on this beast.
The question isn't who is going to let me, it's who is going to stop me.
You can't reason with the unreasonable.
Too dumb to quit.

Insta: https://www.instagram.com/hondaatc/

Photography: http://wgolightly.smugmug.com

Real Job: http://landsofnorthflorida.com

Offline johnu

  • DTT BOTM WINNER
  • *
  • Posts: 1500
Looking forward to it!

Offline Hurco550

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 3527
  • Keep er' Between the ditches
Any new updates? Still loving this thing, and hoping to see it finished :)
"If you just picked up a drug habbit instead of a kawasaki triple at least you could get high while you waste money"
~ bradj
1988 tw200, the swamp donkey: http://www.dotheton.com/forum/index.php?topic=75455.0
2006 Suzuki DR650 Adventure monowheel trailer build: http://www.dotheton.com/forum/index.php?topic=75033.0
1976 BMW R90/6 farkilitious: http://www.dotheton.com/forum/index.php?topic=74349.msg882477#msg882477
1975 RD350 Road Racer: http://www.dotheton.com/forum/index.php?topic=70652.msg833688#msg833688
1976 GT250 Rebuild: http://www.dotheton.com/forum/index.php?topic=64973.new#new
Full Custom Pit Bike: http://www.dotheton.com/forum/index.php?topic=66954.new#new
1971 Yamaha 90cc twin HS1: http://www.dotheton.com/forum/index.php?topic=70498.0
"much ingenuity with a little money is more profitable and amusing than much money without ingenuity" - Arnold Bennet

Offline BillyGoat4130

  • Posts: 179
    • Live Oak FL Real Estate
I'm still here - work and other things just have been kicking my ass. I've cranked the bike up and ran it a few times to keep the gas fresh in the carb but have not done really anything else with it lately. Hard to believe it's been this many months already without any work on it. Hopefully soon I can get back on it. Really just the matter of buttoning up the exhaust, wiring, and a lot of little things at this point.
The question isn't who is going to let me, it's who is going to stop me.
You can't reason with the unreasonable.
Too dumb to quit.

Insta: https://www.instagram.com/hondaatc/

Photography: http://wgolightly.smugmug.com

Real Job: http://landsofnorthflorida.com