Gt750 classic

[teazer]

You would have to bore the triple clamps to fit the 37mm tubes, no?

Yes, or fit the triples that came with the legs.  IIRC, the width was the same, but obviously that should be checked.  35mm to 37mm is only 1mm to be machined radially and there's enough meat to do that.

[CrabsAndCylinders]

Well guys do bore out the 900F clamps to accept F1 tubes and that works.  Sorry, I mean F2.

[teazer]

More than one way to skin that particular cat, so to speak.  Just don't tell our cat I said that

That's the fun thing with this sort of project, once you start to think of other ideas, it's like a whole new light goes on and choices just keep presenting themselves. And the more innovative they can be if we don't feel constrained to keep it stock.

[MickyC]

Found this site if it helps too. Gives all make and models tube diameter. http://ensaster.com/pics/thumper/fork-diameter-chart.txt
Unsure if I posted this before.


Sent from my iPhone using DO THE TON

[MickyC]

All sorted after a day of pain. Even fixed the back lights high beam and temp sensor properly. So caught up with a few mates for a burn.



Sent from my iPhone using DO THE TON

[MickyC]

New grips on and she’s going great.


Sent from my iPhone using DO THE TON

[killerx]

Very nice!
Did you ever find out what pipe that is?

[tattoo]

So very nice!

Congrats on a great result.

[morgs88]

Wow what a gorgeous looking bike! Done a cracking job


Sent from my iPhone using DO THE TON

[teazer]

Very nice!
Did you ever find out what pipe that is?

Almost certain it's a Aussie made Bromlech pipe.  Similar to a Piper but made Downunder.