collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: Brake shaft diameter? Need measurements xs,rd,cb  (Read 404 times)

Offline briandk

  • Posts: 39
Brake shaft diameter? Need measurements xs,rd,cb
« on: Apr 08, 2018, 19:07:53 »
Trying to figure out how to hook my Tarozzi rear sets up to the splined brake pedal shaft on my TR1. I see Tarozzi has a lever that fits XS650, XS750, Xs860, RD350,rd400, CB350+cb400 and wonder if any of those has a 19mm shaft like the TR1. Do if someone with one of those models can measure the splined brake shaft, that would be great.


Sent from my iPhone using DO THE TON

Offline briandk

  • Posts: 39
Re: Brake shaft diameter? Need measurements xs,rd,cb
« Reply #1 on: Apr 09, 2018, 07:58:02 »
Figured it out, according to cognito moto they fit xv750/xv920 also: https://cognitomoto.com/products/yamaha-brake-lever-for-spline-xs650-xs750-xs850-rd350-rd400

Online J-Rod10

  • DTT SUPPORTER
  • *
  • DTT BOTM WINNER
  • *
  • Posts: 3277
    • Slipstream Cycle Works
Re: Brake shaft diameter? Need measurements xs,rd,cb
« Reply #2 on: Apr 09, 2018, 09:35:02 »
That particular spline fits all if the SOHC Hondas, outside of the 78 750, practically all of the Yamaha's as well, along with a plethora of 4 wheelers. Shift shaft is the same on all of the Hondas and Yamahas.

If you want one, I machine them out of billet 6061. $35 + $3 shipping.

Offline briandk

  • Posts: 39
Re: Brake shaft diameter? Need measurements xs,rd,cb
« Reply #3 on: Apr 09, 2018, 17:42:22 »
That particular spline fits all if the SOHC Hondas, outside of the 78 750, practically all of the Yamaha's as well, along with a plethora of 4 wheelers. Shift shaft is the same on all of the Hondas and Yamahas.

If you want one, I machine them out of billet 6061. $35 + $3 shipping.

I'm in Europe though so will try and source something locally first to avoid the import taxes, but thanks for the offer.