mchltshcr
Active Member
New to the forums and wanted to document my build as it progresses. DTT thus far has been a wealth of knowledge.
Recently picked up a running - I use the term loosely - 1974 CB360 with just under 14k miles for a fair price. Photos make it look better than it does in person.
Has a number of issues, most electrical from what I gather. Spark plug wire was cracked open and possibly not firing consistently, starter would make a slight attempt and halt, condenser ended up showing no life at all, carb overflow was going nuts on one side, exhaust was rusted out on the bottom of one side, mismatched mirrors, etc.
So the teardown begins. Learning as I go. End goal is a restore/rebuild from frame upward that's super clean and minimal. Thanks all.
Recently picked up a running - I use the term loosely - 1974 CB360 with just under 14k miles for a fair price. Photos make it look better than it does in person.
Has a number of issues, most electrical from what I gather. Spark plug wire was cracked open and possibly not firing consistently, starter would make a slight attempt and halt, condenser ended up showing no life at all, carb overflow was going nuts on one side, exhaust was rusted out on the bottom of one side, mismatched mirrors, etc.
So the teardown begins. Learning as I go. End goal is a restore/rebuild from frame upward that's super clean and minimal. Thanks all.