Introducing the Sparck Moto FB-11

Right on. A stud would allow whatever gauge the customer chooses, with the right terminal end, instead of limiting the size to what you can cram in the screw clamps.
 
so, any updates on this? currently working on my first build. previous owner cut all the wires and soldered. while this isn't a concern, i think i screwed up rewiring for new handle controls and headlight. can't recut, as there's not enough wire.

thinking of ordering a new harness, but would love this in its place. I hope this is newbie friendly........
 
It's on hold for a bit while we get the cam chain tensioners sorted out. Progress likely to resume toward the end of summer.
 
Making progress!
 

Attachments

  • unnamed.jpg
    unnamed.jpg
    99.7 KB · Views: 1,036
Still a ways out, I'm afraid. Maybe beginning of summer?

Other projects keep getting in the way.

It's expected that this is our final prototype for the first version, though. We discovered a few additional board layout changes we want to make and are working on fitting it all inside an enclosure.
 
Definitely haven't forgotten you, Ed. How close are you to wiring up your bike? Honda 450 was it?
 
You remember! I am impressed.
The custom tank is being built as we speak by a local fellow in RI. The electronics tray for it is 95% complete.
Then the wiring that you will be making for me come into the picture.
 

Attachments

  • IMG_20150208_195336_resized.jpg
    IMG_20150208_195336_resized.jpg
    274.2 KB · Views: 404
  • IMG_20150208_215826_resized.jpg
    IMG_20150208_215826_resized.jpg
    238.1 KB · Views: 410
  • IMG_20150211_133706_resized.jpg
    IMG_20150211_133706_resized.jpg
    130.9 KB · Views: 1,104
  • IMG_20150211_134001_resized.jpg
    IMG_20150211_134001_resized.jpg
    182.9 KB · Views: 1,132
  • IMG_20150211_154039_resized.jpg
    IMG_20150211_154039_resized.jpg
    172.7 KB · Views: 1,110
Hi sonreir, any updates on this? Im very interested, i'ven looking at the ultima wiring harness, but i think your controller would be a much better choice, since i would be able to run everything with it, with the ultima one you still have to wire the rectifire and ignition separetly
 
i would definitely volunteer my bike for a "none Starter" circuit version. my bike is kick start only, so i dont need it.

is this board going to include a flasher relay?
 
Keiff Hardcore said:
i would definitely volunteer my bike for a "none Starter" circuit version. my bike is kick start only, so i dont need it.

is this board going to include a flasher relay?

Long term, yes. Short term, no.
 
Back
Top Bottom