Darkness 78 CB750

[Hutch08]

What was his job?

Sent from my XT1254 using Tapatalk

[UDouble]

What was his job?

Sent from my XT1254 using Tapatalk

senior intelligence analyst and was a pilot at one point. after that he went to wall street and made a killing

[Hutch08]

Sounds like an interesting career. Im work with pilots every day and there is always a good story to hear

Sent from my XT1254 using Tapatalk

[Hutch08]

So I'm a little pissed right now. Just took off my shifter cover and discovered a chunk missing from the bottom. Not sure how easy those are to locate and replace. Mad I didn't see it earlier.. Ugh

Sent from my XT1254 using Tapatalk

[coyote13]

Wha-bam!

http://www.ebay.com/itm/1975-honda-cb750-cb-750-ss-f-sohc-h106-shifter-cover-/250676673233?hash=item3a5d7e7ad1:m:mxH9L9aRK6ovhil_pZxSdGg&vxp=mtr

[Hutch08]

Waiting on parts to arrive. Figured I would design the tank logo

Sent from my XT1254 using Tapatalk

[Hutch08]

Oil tank arrived yesterday from CognitoMoto and installed it last night. This tank is awesome, very heavy duty and is well made. I did have to remove two more tabs that interfered with the top of the new tank where the old tank had its mounts. The hoses were a bit of a challenge but some heat and grease helped. I am not going to keep the rubber frame fasteners but instead weld some metal tabs for a clean flush look

Sent from my XT1254 using Tapatalk

[Hutch08]

Fixed the dents and dings on both sides of the tank. Almost ready for primer and paint. The lead fill worked great and only took a little body glaze to fill some pinholes

Sent from my XT1254 using Tapatalk

[Hutch08]

Next up is some tank lining

Sent from my XT1254 using Tapatalk

[Hutch08]

Chopped the center frame to make more room for the electrics tray and battery. Fit a 1" pipe for re-stability.

Sent from my XT1254 using Tapatalk