Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Anyone have an idea on a alternative for the KZ650 B1 petcock (right petcock in the picture)? It was a 1 year only petcock, and it cant be rebuilt since its just a worm that turns vs the 4 holes like every other petcock. They are impossible to find, so im needing something else to fit. Thinking that I could get one off of a B2 (left one in the picture) which is vacuum operated, cut out the diaphragm and then cap the vacuum port as it would then spew fuel. Before trying that, hoping maybe someone else has another petcock that would work or I should look into getting.
So that one looks to be 44mm (center to center) hole spacing, I havent taken it off to measure but looks like you have a B model. The SpeedMotoCo sight just doesn't list that model. The xs650 petcock looks to have 42.5mm (apart) spacing and the xs400 has 34mm (unknown) spacing.
So the XS650 if its inside to inside might actually be 44mm center to center. I guess I just need to take mine off and measure it.
Hi all, I am in the UK, I have just purchased an imported 1977 KZ650 C1 model and I am in need of a replacement fuel tap (petcock), it is the non vacuum type with the wider 44/45mm bolt spacings.
Any suggestions on what will fit ?
I have read that the xs650 tap will fit, but does that supply enough fuel ? Those are a smaller bore tap and of course the xs650 has one per carb.
Cheers
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
