Starting a 82 honda 750 v45

Yes clean as can be. I have never had a hydraulic clutch. Just not sure on the feel. I wen out and spun the back wheel and it went into first. Do you think it need its first ride in 20 years? Thats what im thinking it might break them plates loose and It will be on its way. If i ride it should i treat it like its brand new. Be gentle is what i mean
 
Well went out to the garage and just burped the banjo on the master and there was the lever i think im looking for. big difference. Hope that does it
 
well got it going went on a few rides adjusted the idle and seems great. shifted thru all the gears fine. Just need to put some tires on then i can get her going up to speed :)
 

Attachments

  • photo(4).JPG
    photo(4).JPG
    633.3 KB · Views: 263
Great news. Be ready to re-synchronize the carbs too. Most of the time, the springs on the carbs/slides hell any mechanical part change a little as they wear back in and find their happy place ::)

Have fun, those bikes are a blast to ride.
 
Thanks a lot. That bike does sit just right. It is just more handy than my kz1000. Gonna be fun!
 
Time for some tweaking. New pegs and rear turn signal holder
 

Attachments

  • ImageUploadedByTapatalk1364003935.457108.jpg
    ImageUploadedByTapatalk1364003935.457108.jpg
    85.5 KB · Views: 355
New tires also!
 

Attachments

  • ImageUploadedByTapatalk1364003985.118981.jpg
    ImageUploadedByTapatalk1364003985.118981.jpg
    83.2 KB · Views: 363
  • ImageUploadedByTapatalk1364003996.607112.jpg
    ImageUploadedByTapatalk1364003996.607112.jpg
    108.9 KB · Views: 380
Well started riding a little. Man is this a nice bike. Magically the tach started working I'm the middle of a ride. I think the needle itself was just seized up and finally broke free!
 

Attachments

  • ImageUploadedByTapatalk1366888796.028033.jpg
    ImageUploadedByTapatalk1366888796.028033.jpg
    81.2 KB · Views: 642
Back
Top Bottom