collapse

www.dimecitycycles.com

https://www.townmoto.com/collections/vanson-leathers


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: Cl350 Scrambler:Thigh fryer  (Read 1692 times)

Offline freerideordie

  • Posts: 91
Cl350 Scrambler:Thigh fryer
« on: Jan 15, 2018, 13:37:03 »
Been a long time since I posted on here, pretty much just gave up since photobucket essentially deleted any photos I had.  Anyway, I have too many projects but have gotten back to being responsible and posting some progress.  Picked up a pretty clean and running 72 cl350 from a buddy of mine and here is how it goes. Less talk more photos. 





So, the shop is pretty full.  Just a few projects at the moment. 87 BMW k100rs Im building for friend. Cb650 bobber. cb550. cl350. grom. 72 bronco on rotisserie.



« Last Edit: Jan 17, 2018, 11:49:42 by freerideordie »

Offline WhyNot

  • DTT SUPPORTER
  • *
  • Posts: 1168
  • ~~~If it ain't raining, I'm riding~~{iii}?~~prost~
Re: Cl350 Scrambler
« Reply #1 on: Jan 16, 2018, 09:29:11 »
wow, pretty full shop there man.

Interested in seeing how this build goes, considering I'm in the midst of one myself.
2006 Harley Davidson Heritage Softail
1975 Honda CB750K5 needs carb work
1974 Honda CB350F2 needs tins painted (being lazy)
1972 Honda CB175K2 roller no engine
1972 Honda CB/CL350 Engines need roller
1972 Honda SL350K2 Frame for above engine
1972 Honda CB100K2 needs kicker shaft
1990 Mitsubishi MM needs engine rebuild
1984 Dodge D50 Beater DD since 1997

Offline freerideordie

  • Posts: 91
Re: Cl350 Scrambler
« Reply #2 on: Jan 16, 2018, 11:23:54 »
Sometimes it hurts to chop a frame, this is not one of those times.  The stamped steel looks awful and had to go.

bike up on the lift.


 I just finished this table/lift and am loving if.  Used a HF 8ton air/hydraulic jack, 2x2 tubing and a 3/16" steel top.  I added several features like a folding ramp and wheel clamp.  But maybe my favorite is that I found I can shove some aluminum angle under the top, and hang parts bins.


see whats i mean, sh*tty stamped garbage boner



chopped






marking where I want to attach rear frame with 1/4"


Finally!  I always think Im gonna use these things and I never do, worked pretty well


transfer to steel




check fit


Glue that sucker on.


Repeat.  I will tie these in further later on, to clean up the soon to be tank mounting area.








rear hoop all welded up, since the shock mounts were stamped steel wrapped around tube, I had to slug and rosette weld some tube to tie back into. You can see under ther hoop, I welded up a jig that bolts to the rear shock mounts on the swingarm, this way I could keep everything centered while I weld.  Of course will check on the frame jig later once evertything is further broken down, also gotta make some new shock mounts

Offline The Limey

  • Posts: 407
  • Evil English Villain
Re: Cl350 Scrambler
« Reply #3 on: Jan 16, 2018, 11:27:43 »
 Damn, that's a neat job.
I was born a rocker.  I'll die a rocker.  And I'm proud of it.

Offline 1fasgsxr

  • Posts: 1470
Re: Cl350 Scrambler
« Reply #4 on: Jan 16, 2018, 13:30:17 »
Nice looking work !
http://www.dotheton.com/forum/index.php?topic=41083.0

Life is a journey from the maternity ward to the crematorium....

Offline WhyNot

  • DTT SUPPORTER
  • *
  • Posts: 1168
  • ~~~If it ain't raining, I'm riding~~{iii}?~~prost~
Re: Cl350 Scrambler
« Reply #5 on: Jan 16, 2018, 14:44:44 »
wow..............
2006 Harley Davidson Heritage Softail
1975 Honda CB750K5 needs carb work
1974 Honda CB350F2 needs tins painted (being lazy)
1972 Honda CB175K2 roller no engine
1972 Honda CB/CL350 Engines need roller
1972 Honda SL350K2 Frame for above engine
1972 Honda CB100K2 needs kicker shaft
1990 Mitsubishi MM needs engine rebuild
1984 Dodge D50 Beater DD since 1997

Offline freerideordie

  • Posts: 91
Re: Cl350 Scrambler
« Reply #6 on: Jan 17, 2018, 11:16:55 »
Got the subframe almost all welded up


 Ive removed the stock tank-mounting points  in the rear and will weld a back on to the tank to not only clean up the look, but will provide a mounting point for the seat pan, similar to dirt bikes.




I need to finish up the seat pan, and make the seat.  I'm working on some seat designs, hopefully will be able to market some later, so ive been doing some testing, making plugs and molds to fill with 2 part flexible urethane foam .  Have made some progress already and will update some more later. 

Online canyoncarver

  • DTT SUPPORTER
  • *
  • Posts: 3566
  • 'hacking is learning'
Re: Cl350 Scrambler:Thigh fryer
« Reply #7 on: Jan 17, 2018, 12:37:32 »
I'm in. 
--

YZF750/1000R The Fly
KZ 750 Twin
ZRX 1100
KZ400 The Rabbit
65 Norton, My damn Shovelhead chop, and an 86' FXR
more YZF750R's, the KZ's, a Zephyr750...and the unfinished 75' CB550 cafe.
--

Offline freerideordie

  • Posts: 91
Re: Cl350 Scrambler:Thigh fryer
« Reply #8 on: Jan 17, 2018, 16:40:33 »

Offline freerideordie

  • Posts: 91
Re: Cl350 Scrambler:Thigh fryer
« Reply #9 on: Jan 17, 2018, 16:43:49 »
Made a lil  video of pouring 2 part foam, still workin some bugs out, but came out pretty good for the first go round.