Rear master cylinder bracket

Hi, i wanted to ask before i weld everything in place, my bike used to have rear band brakes but i changed everything to hydroaulics, i fab up a bracket and before i weld it in place just wanna make sure it would work, the position of the brake master cylinder

Looks perfect. I have a rear disc swingarm and rear caliper you can have for shipping.

Looks great. Good work.

Thanks guys! I think i got everything for the coversion, im using a xs400 rear wheel since i couldnt find a xs500 one, the rim is the same width at the front but if i use the propper tire i should be good, in going for the brat/tracker thing, the diameter of the bearings and everything lines up with the bolt and stuff so i hope everything works together!