Re: FJ1100 Street Turd
hillsy, I went to a local fabric store last night and bought a remnant piece of UV protected black vinyl. Good thing is is that it was a remnant piece, so half off. I also bought some foam adhesive. I think I have enough fabric to do both this seat, and my ATV seat 8)
On a side note, I took a cable out of the equation in the twist throttle, and now it just pulls. I also greased the inside of the throttle cable box - seems to work just fine now. I also spent some time this morning working on the front cowl. I bench tested the light and installed that and the gauge cluster into the cowl. All in all, it's going back together pretty well. I'd like to take the valve cover off and check the backlash, but looking into the 1200, they use shims and a special tool. I need to verify if that's how the 1100 is. If it is, I may need to forgo that, or have a shop do it.