Hydraulic Brake conversion for the CB200, lets make a kit!!??!!

I put rs125 forks on my cb200, the brake works great will all stock aprilia parts, only addition was a PCD adapter to get the cb200 hub to match up with the rs125 disc.

http://www.dotheton.com/forum/index.php?topic=43873



Sent from my iPhone using Tapatalk
 
I'm coming in way late on this one and I haven't read through the thread, but Little Horse Cycles in Hillsboro, OR makes these.

This one is on a recent CB450 build.
 

Attachments

  • 12046775_1187680057915758_1300519046507057121_n.jpg
    12046775_1187680057915758_1300519046507057121_n.jpg
    60.4 KB · Views: 375
That caliper looks just like some Honda ones I have, forget what they are off but have part number (one is in a box)Ever since I saw a Z1 'pull' the caliper off fork leg I've been very leary of calipers mounted in front of fork on cast lugs. BTW Matt, first time I've looked at thread in years, that hydraulic clutch conversion may work but looks way too bulky, they should have required cover to be welded for mount or machined up something that fitted into original hole (that's what I would do)
 
Back
Top Bottom