collapse

* Laugh it up fuzzball

Refresh History
  • JustinLonghorn: The mopeds I use to monkey with, at times it was cheaper to replace an entire carb that try to clean it properly.
    May 22, 2019, 14:33:05
  • advCo: I cleaned the z50 carb last night. Its weird, there's no pilot jet
    May 22, 2019, 14:36:21
  • Maritime: I will be buying a carb as soon as I can find one I can fit up
    May 22, 2019, 14:38:12
  • Maritime: I may have to modify the intake to use an aftermarket one
    May 22, 2019, 14:38:37
  • Maritime: The one for it is unobtanium
    May 22, 2019, 14:38:51
  • Nj732port: I have the stock carb butt fuckkkkkkk its a pain to deal with
    May 22, 2019, 14:51:42
  • Nj732port: its like changing the spark plugs on the passenger side of a ranger
    May 22, 2019, 14:51:57
  • Maritime: loads of fun
    May 22, 2019, 15:01:36
  • Maritime: my stupid scooter is a 3 year model run from cloned 1980's suzuki parts
    May 22, 2019, 15:02:43
  • Maritime: there are some things very specific to it and hard to find aftermarket or alternates
    May 22, 2019, 15:03:10
  • Nj732port: no harbor freight clones?
    May 22, 2019, 15:04:19
  • Nj732port: looks like some use 2.5 some use 3.0 slides but its hard as f to start so i need to do something with the pilot
    May 22, 2019, 15:05:00
  • Nj732port: if its getting more air with the bigger cut then id need more fuel from the pilot is what im thinking
    May 22, 2019, 15:05:35
  • Nj732port: I have a 25 pilot now so ill look through my stash for a 30
    May 22, 2019, 15:06:00
  • advCo: talk to murray
    May 22, 2019, 15:16:23
  • advCo:
    May 22, 2019, 15:26:54
  • Maritime: Rad
    May 22, 2019, 16:15:26
  • Nj732port: hes the one i got the oG specs from thats why im thinking this whole 3.0 slide over the 2.5 is messing me up
    May 22, 2019, 16:48:44
  • Maritime: Stock SR500's are hard to start, you need to do everything just perfect or they refuse LOL
    May 22, 2019, 16:55:19
  • Maritime: But yes a larger Pilot might help things if the mixture screw doesn't do anything
    May 22, 2019, 16:56:24
  • cxman: 3.0 slide whould be ok richen the main   what vmx are you runnning
    May 23, 2019, 09:10:29
  • cxman: sorry richen the pilot (not enough coffee yet)
    May 23, 2019, 09:11:44
  • advCo: morning fellas
    May 23, 2019, 09:49:03
  • Maritime: Morning
    May 23, 2019, 10:02:18
  • Jimbonaut: Morning chaps, can't get this damn bearing off the primary shaft.  Froze it again, no dice.
    May 23, 2019, 10:40:14
  • Jimbonaut: When I apply heat to the bearing, how long should I heat it for?  Seems like the heat transfers to the shaft pretty fast
    May 23, 2019, 10:40:51
  • Maritime: I think you need to get it hot fast and a smallish torch won't do that. need at least a plumbers MAP torch
    May 23, 2019, 10:48:45
  • Jimbonaut: Ah
    May 23, 2019, 10:50:45
  • Jimbonaut: So not the missus' creme brle lighter then
    May 23, 2019, 10:51:13
  • advCo: Jim, you may just rent a puller
    May 23, 2019, 11:02:43
  • advCo:
    May 23, 2019, 11:03:58
  • Jimbonaut: That would do it
    May 23, 2019, 11:06:33
  • advCo: Good tool to have
    May 23, 2019, 11:07:39
  • Jimbonaut: The manual says something about applying light pressure on the bearing to release it.  Sure, if that light pressure is coming from The Hulk
    May 23, 2019, 11:07:40
  • advCo: I'd think it would slide right off but sometimes they get stubborn
    May 23, 2019, 11:14:04
  • Jimbonaut: I'll try it again with the freezer/mini blowtorch technique, otherwise I'll see if I can rent something or take it over to a mates
    May 23, 2019, 11:18:22
  • Jimbonaut: It's stubborn for sure
    May 23, 2019, 11:18:31
  • Maritime: CT rents those and Princess Auto sells em cheap I think. PB blaster on the shaft would help too I bet
    May 23, 2019, 11:48:34
  • Jimbonaut: I checked out CT online but didn't see an awful lot - still, it's been about 12 hours since my last trip there so I'm long overdue =)
    May 23, 2019, 11:51:12
  • Maritime: LOL. the parts counter has all that stuff. You buy it, use it, then return it for a full refund
    May 23, 2019, 12:40:33
  • advCo: Yep there's a few pieces here we can do that
    May 23, 2019, 13:28:37
  • JustinLonghorn: If only I had 5K sitting around:
    May 23, 2019, 14:53:04
  • advCo: Yep
    May 23, 2019, 16:09:53
  • Maritime: ha yep
    May 23, 2019, 16:38:05
  • advCo:
    May 23, 2019, 16:51:32
  • Hurco550: evenin gents
    May 23, 2019, 18:38:39
  • cxman: we can put a busa engine in that thing!
    May 23, 2019, 19:14:55
  • cxman: irk will tub it out
    May 23, 2019, 19:15:17
  • cxman: its perfect
    May 23, 2019, 19:15:43
  • Hurco550: i like how you asked "can" and not "should" lol
    May 23, 2019, 21:00:35

* Recent Pictures - click on picture to go to post

tank3.jpg
Posted by: Rick4004
tank2.jpg
Posted by: Rick4004
IMG_0167.jpg
Posted by: speedmotoco
IMG_0166.jpg
Posted by: speedmotoco
IMG_0165.jpg
Posted by: speedmotoco
IMG_3490.JPG
Posted by: irk miller
IMG_3626.jpg
Posted by: Scratcher09
drumpf.JPG
Posted by: stroker crazy
20190522_182404.jpg
Posted by: DailyRideNH
20190522_182400.jpg
Posted by: DailyRideNH
drumpf.JPG
Posted by: stroker crazy
IMG_7573.JPG
Posted by: oldmechano
91N0SNb4XxL._SL1500_.jpg
Posted by: speedmotoco
Untitled.png
Posted by: Shortround
Untitled2.png
Posted by: Shortround
hoses.jpg
Posted by: canyoncarver
IMG_1338.JPG
Posted by: MrMister
x2.jpg
Posted by: TranceMachineVienna
x1.jpg
Posted by: TranceMachineVienna
IMG_3478.JPG
Posted by: irk miller


www.dimecitycycles.com www.cognitomoto.com

www.speedmotoco.com https://www.townmoto.com/collections/vanson-leathers

www.CITYLIMITMOTO.com www.jadusmotorcycleparts.com

www.lostapostlejewelry.com www.sparckmoto.com