1bantamcloser2divorce
New Member
Hello there,
I am looking for help from electronic wizards out there. I am building up a 1950's BBSA Bantam 150cc single cylinder two stroke. At the moment I want to set it up with total loss ignition. The electrical system is about as basic as could be, consisting of battery, coil, points and condenser.
The stator plate is down to the bare bones. The black wires in the picture are now gone.
The coil I just purchased has one terminal and HT lead.
Would someone be kind enough to talk me through the wiring set up, as i am an electrical dunce.
Many thanks!
Andy
I am looking for help from electronic wizards out there. I am building up a 1950's BBSA Bantam 150cc single cylinder two stroke. At the moment I want to set it up with total loss ignition. The electrical system is about as basic as could be, consisting of battery, coil, points and condenser.
The stator plate is down to the bare bones. The black wires in the picture are now gone.
The coil I just purchased has one terminal and HT lead.
Would someone be kind enough to talk me through the wiring set up, as i am an electrical dunce.
Many thanks!
Andy
