Hey all,
I'm hoping one or more of you guys could help me out. I have some new LED headlight bulbs I'm hoping to sell, but I want to give them a test run. Unfortunately, I don't have a bike at the moment that I care to dig into, so I respectfully request one of you guys do it. ;D
The bulbs are 10W low beam and 15W high and use 4mm bullet connectors for the wiring. The mechanical mount is an H4 format.
They are designed to work on 6V or 12V systems, so I'll need one of each, please.
Also, if you're going to volunteer, please be able to get these installed within a week and pictures of the night beam broadcast (both high and low beam) back to me ASAP.
As you're doing me a favor, you'll get to keep the bulb and I'll cover the shipping costs, too.
I only have two of these to test with, so it will be first come, first served.
Thanks in advance,
Matt
I'm hoping one or more of you guys could help me out. I have some new LED headlight bulbs I'm hoping to sell, but I want to give them a test run. Unfortunately, I don't have a bike at the moment that I care to dig into, so I respectfully request one of you guys do it. ;D
The bulbs are 10W low beam and 15W high and use 4mm bullet connectors for the wiring. The mechanical mount is an H4 format.
They are designed to work on 6V or 12V systems, so I'll need one of each, please.
Also, if you're going to volunteer, please be able to get these installed within a week and pictures of the night beam broadcast (both high and low beam) back to me ASAP.
As you're doing me a favor, you'll get to keep the bulb and I'll cover the shipping costs, too.
I only have two of these to test with, so it will be first come, first served.
Thanks in advance,
Matt