Re: Rachels Can-Am 600, Movin’ on up...

Re: 78 CB400A for Rachel

Why did you drill the hole? You just pull the old one out and press a slightly larger one in. A drill doesn't make a round hole, especially when you're not drilling completely through material.
 
Re: 78 CB400A for Rachel

You can also spread the end of the brass tubing to give it a tighter fit.
 
Re: 78 CB400A for Rachel

The soldered one hasnt leaked a drop since sunday. I think It may have had some gunk in the drain screw seat.
So now the solder seems to be holding fast along w the drain screw.
 
Re: 78 CB400A for Rachel

Oh, that's great. All this talk and searching made it look like it was leaking again and you had to find another fix.
 
Re: 78 CB400A for Rachel

irk miller said:
Why did you drill the hole? You just pull the old one out and press a slightly larger one in. A drill doesn't make a round hole, especially when you're not drilling completely through material.

The first one had the tube rotted off where it met the aluminum. So I had to drill it out. Plus the new brass tube was larger diameter.
 
Re: 78 CB400A for Rachel

irk miller said:
Oh, that's great. All this talk and searching made it look like it was leaking again and you had to find another fix.

Nope I "thought" I needed another fix. But shes holding. And the shrink tube conversation simply continued.
 
Re: 78 CB400A for Rachel

Just an FYI, 79 - 82 CB750 is the same float bowl but with a pump. There might be a swap. Or maybe just plug the pump.
 
Re: 78 CB400A for Rachel

http://www.ebay.com/itm/82-HONDA-CB750SC-CB750-NIGHTHAWK-750-CARBURETOR-FLOAT-BOWL-CHAMBER-1-/371746896150?hash=item568dd77916:g:MdAAAOSw8w1X6UA1&vxp=mtr
 
Re: 78 CB400A for Rachel

irk miller said:
http://www.ebay.com/itm/82-HONDA-CB750SC-CB750-NIGHTHAWK-750-CARBURETOR-FLOAT-BOWL-CHAMBER-1-/371746896150?hash=item568dd77916:g:MdAAAOSw8w1X6UA1&vxp=mtr

Very interesting. Thanks dude. 8)
 
Re: 78 CB400A for Rachel

if you need a spare or ten

its the same as a cx500 gl500 gl650 cx650 carb bowl

and i know someone that has mounds of those as they take them off bikes

and put mikunis on
 
Re: 78 CB400A for Rachel

cxman said:
if you need a spare or ten

its the same as a cx500 gl500 gl650 cx650 carb bowl

and i know someone that has mounds of those as they take them off bikes

and put mikunis on

How much $ for a couple spares w good tubes?
 
Re: 78 CB400A for Rachel

Started getting a stubborn sticky float valve, used the dremel buffer and toothpaste to polish the seat. Fixed.

11494-220318045138-34871765.jpeg


11494-220318045138-34961895.jpeg


Also, after logging some miles on her chasing Rachel around town. And already having carbs off.

I re-checked compression. Shes good to go. 8)

11494-220318045138-34971335.jpeg


11494-220318045138-34981222.jpeg
 
Re: 78 CB400A for Rachel...THE MOVIE

That movie trailer is most excellent!!!

Sent from my SM-G900V using Tapatalk
 
Re: 78 CB400A for Rachel...THE MOVIE

Rachel spent the summer riding. Trouble free 8)

11494-171217130821.jpeg


This morning it happened.

11494-171217130841.jpeg


Not planning any mods, just a good clean up.
 
Back
Top Bottom