Tonnotyetdone
New Member
I know there are numerous threads regarding aftermarket starter buttons, but I can't seem to find one that fits my application. I have a 1976 CB360 with, from what I can tell, a right hand switch from one of the previous years based on the fact that it has the headlight on/off switch. I broke the starter button while switching out the bars and am looking to put an aftermarket SPDT button on it. My question is, to which poles do I hook up the green/red wire and yellow/red wire? And should there be another wire that should be ran to the switch? The only wires from the original setup were the two listed. It was working fine prior to me messing with the switch, although I may need to replace the solenoid. Any and all help, as always, is appreciated!
Sent from my XT1565 using DO THE TON mobile app
Sent from my XT1565 using DO THE TON mobile app