Turn signals not working

Chris9178

Chris9178

New Member
Hi everyone I can't seem to get my turn signals to work. Just replaced all 4 on my 1984 Suzuki GR650 tempter. I'll attach a few pictures of what's going on. My base knowledge is next to nil. I also have a pic of my wiring diagram from my service manual. The signals in the back were three wire but I'm switching to two which is what's really throwing me here. Mind the speaker wire as temporary until I get some actual wiring. Thanks everyone.
313793ba5f2fd0e81d333f1c3641f4ff.jpg
1f21481968317ca5883a5fc8536d4f71.jpg
a86c0064ffaada6853868b6e39fc19fe.jpg
434b9e3a9a4c5ecb6f7400a9efa6240e.jpg


Sent from my SM-G950W using Tapatalk
 
Those look like LED signals. Did you also change the relay to an electronic relay? There isn't enough resistance in an LED to make the relay work unless it's electronic.
 
Re: Turn signals not working

Well before i replaced them all I tried one in the rear and it seemed to work fine. But now that I've switched them all they don't work. Lol I just looked at the order from Amazon and your right they are led ordering the led relay now. Will I need one for front and one for rear. Thanks once they are here lol where do i plug them in.

Sent from my SM-G950W using Tapatalk
1d7a269e2a10d43bef5972d0189eeaca.jpg
ea1e16792076fb4c445f089e4af33b9b.jpg
 
No, just one relay. SHould be able to get one with the same connectors as your stock relay. Is it the 2 prong relay? Sparck Moto, a vendor here, sells the 2 prong version that works with LED.
 
irk miller said:
No, just one relay. SHould be able to get one with the same connectors as your stock relay. Is it the 2 prong relay? Sparck Moto, a vendor here, sells the 2 prong version that works with LED.
Click to expand...
Would this one work?
180be56de152ef7525f9f4f7dbf107f5.jpg


Sent from my SM-G950W using Tapatalk
 
Re: Turn signals not working

irk miller said:
As long as you can work the connection, it will work. Yep.
Click to expand...
Thanks. Work the connection? Im so sorry im super new at all this.

Sent from my SM-G950W using Tapatalk
 
Any auto parts store will have a version that is plug and play. You may want to take that stock relay and compare in store.
 
irk miller said:
Any auto parts store will have a version that is plug and play. You may want to take that stock relay and compare in store.
Click to expand...
This is my stock relay correct?
218325a2097d1f9406742d6b37688099.jpg


Sent from my SM-G950W using Tapatalk
 
Re: Turn signals not working

So I got all the turn signals working. I had to take the plastic plug off of the led turn signal I purchased and used those wires and plugged directly into blue wire and green/yellow of above picture. Thanks for your help!

Sent from my SM-G950W using Tapatalk
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom