collapse

www.dimecitycycles.com


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.cognitomoto.com

www.townmoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com


Author Topic: PID Controller help !!  (Read 239 times)

Offline 1fasgsxr

  • Posts: 1046
PID Controller help !!
« on: Sep 01, 2017, 07:31:09 »
Any of you guys or gals have experience with PID controllers??  I have an Auber Instruments SYL-2352 for my powder oven and I am too dumb to
figure out how to get it going.  I have power and everything seems to be wired correct but I cant figure out how to "turn on" the element..
I have downloaded the instruction manual but its over my head, I'm not to proud to say that either  8)


HELP !!!  Please..

Offline jimmer

  • DTT BOTM WINNER
  • *
  • Posts: 587
Re: PID Controller help !!
« Reply #1 on: Sep 01, 2017, 14:41:42 »
It powers up ok with no errors, and just won't switch the heating element on? http://www.auberins.com/index.php?main_page=product_info&products_id=3
Yamaha Blaster Bike                                                                  Suzuki T500 Titan Twingle

Offline 1fasgsxr

  • Posts: 1046
Re: PID Controller help !!
« Reply #2 on: Sep 01, 2017, 18:48:28 »
Correct Jimmer

Offline 1fasgsxr

  • Posts: 1046
Re: PID Controller help !!
« Reply #3 on: Sep 01, 2017, 18:48:54 »
You thinking my element is bad?

Offline jimmer

  • DTT BOTM WINNER
  • *
  • Posts: 587
Re: PID Controller help !!
« Reply #4 on: Sep 01, 2017, 21:52:18 »
Put a meter on the output terminals to check for voltage when it should be heating up. Was it working before,or a new purchase?
Yamaha Blaster Bike                                                                  Suzuki T500 Titan Twingle

Offline 1fasgsxr

  • Posts: 1046
Re: PID Controller help !!
« Reply #5 on: Sep 02, 2017, 17:07:07 »
It was working before