I've been holding onto this for a few years thinking one day... but that day isn't coming.
So up for sale is a nice FZR600 swingarm modified to slip right into an XS650 frame. Narrowed to fit the frame and has the shock mounts added along with the mount for a brake arm (not sure if that was stock or added).
Pivot area measures 7 13/16 inches without the dust covers.
Shock mounts measure 8 3/4" from the inside surface across to the other inside surface.
8 3/8" of space on the inside for the wheel (exposed axle)
20 1/2" from pivot bolt to center of axle adjustment area
Complete with axle adjusters and 17mm stock FZR600 axle which is too long by 1/4", as the swingarm has been narrowed to fit the XS frame. Could easily be made up with a couple thick washers and nobody would notice. Also comes with another set of axle adjusters that have been bored to 20mm.
$125 plus the ride from Toronto.
So up for sale is a nice FZR600 swingarm modified to slip right into an XS650 frame. Narrowed to fit the frame and has the shock mounts added along with the mount for a brake arm (not sure if that was stock or added).
Pivot area measures 7 13/16 inches without the dust covers.
Shock mounts measure 8 3/4" from the inside surface across to the other inside surface.
8 3/8" of space on the inside for the wheel (exposed axle)
20 1/2" from pivot bolt to center of axle adjustment area
Complete with axle adjusters and 17mm stock FZR600 axle which is too long by 1/4", as the swingarm has been narrowed to fit the XS frame. Could easily be made up with a couple thick washers and nobody would notice. Also comes with another set of axle adjusters that have been bored to 20mm.
$125 plus the ride from Toronto.