Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Found the center line vertically and horizontally of the hoop.
Traced the LED Strip onto the hoop.
Cut out the shape slightly larger than the led.
Cut a piece of C Channel to the same depth as the LED.
Notched the C channel so I could bend it to the same Radius as the hoop.
Welded the C channel into the hole of the hoop.
Grind/weld/grind/weld/grind/weld until the profiles all matched.
There is probably an easier way to do it, but I don't own a tube bender or a torch. With either of those, getting the radius to match would have been a lot easier.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.