new here

new to the forum

my name is Brian
im from RI

i have a 1974 cb360 that i am building along with the help from my local bike shop cafe cycles. Pete does the welding since i don't have one and he helps with whatever questions i throw at him.
so far ive put a hoop in rear, battery box, li-ion battery, led lighting, custom harness from sparck moto, i decided to make it kick only. im working on building a custom exhaust with parts from cone engineering. my plan is to build a scrambler style bike, but i will be lowering the bike about an inch and eventually i want to stretch it around 4inches (que hate comments). the engine has been painted along with the frame, just need to do the wheels and random pieces. i dont have any pics to post since im at work, ill get some up later

Welcome to the fray. I went to college in Bristol. Great little area for riding. Post up some pics of the bike

Great bikes I have a 74 as well. I would highly recommend the wiseco 10.5/1 compression pistons. I also deleted the. Electric starter. They make a plug. But I cut out an aluminum plug and welded it in for a cleaner look But it sounds like you’re doing all the right things

Welcome from Montreal mate, looking forward to seeing your ride

Here's what I'm working with and progress so far

Here's what I started with

Looks great so far! Still have the rack and luggage?

Welcome!

There are quite a few 360 fans on here, so lots of practical advice etc available.

Good work so far , looking a lot better already!

Steve

BarnBurner said:

Looks great so far! Still have the rack and luggage?

Click to expand...

Thanks, I do have everything still, bike also came with two motors, boxes full of parts, front fairing, and highway bars