Re: CB250RS so i had to start putting her back together before the weekend didnt I
Hey all, well i got the tank and gaurd back from the blaster today so i decided to set the up on the bike just to get a feel for how she is starting to look after renewing the other parts so far. Along with those bits i also got the wheels back from the powder coated and they look great!!! i was looking back through the pics of how everything looked before the refresh and must say that im stoked with them all.. so the plan for the weekend is to repaint the motor (matt black) and get it mounted back into the frame, prep and paint the other parts to the wheels and my friend Peter is coming over to lend a hand with polishing the rear brake hub, engine side covers, valve covers and speedo hub, should come up great!!, the only down side at the moment is i have a 3wk wait for some new bits to arrive for the swing arm and a couple of other bits. Any way there is still plenty of other things to take care of like the redoing the wiring loom, and gettins the front brake caliper, and the new bar controls, headlight and new pegs..... so still plenty....... So here is some pics of the tins mock up.......