cb200 back to the cafe "lola"

cb200 bratracker "lola"

Thanks guys I just got the steering bearing so here's hoping it fits right in. I tried all balls but couldn't find the cb200 they had wheel bearings but not tree. If this doesn't fit will send them a email though as in sure the cb175 may fit too thanks dread :)
 
Re: cb200 bratracker "lola"

no pics sorry, but at this stage I have finished painting the hubs. Have also sourced a great place on the coast to re lace wheels and I also found a great car and bike restorer that is helping me out with some cutting/fab work and engine work sooooooo stoked to see her flying along. Pics soon.

Any one suggest some good tyres for her????
 
cb200 bratracker "lola"

For Andy
 

Attachments

  • ImageUploadedByTapatalk1350801586.428495.jpg
    ImageUploadedByTapatalk1350801586.428495.jpg
    190.3 KB · Views: 230
Re: cb200 bratracker "lola"

:eek: oooooh nice, ;D lol thanks. They've come up great ! bet your looking forward to having them laced to some rims :) and spanking some tyres to em? man i'm really looking forward to some roller pic's 8) keep it up 8)
 
Re: cb200 bratracker "lola"

deepwaterimports said:
Any one suggest some good tyres for her????
only joking ;D
 

Attachments

  • vintage-motorcycle-Y.jpg
    vintage-motorcycle-Y.jpg
    3.8 KB · Views: 734
Re: cb200 bratracker "lola"

deepwaterimports said:

What colr are your rims and spokes going to be. Just curiours. They look good. There's nothing better once their finally laced! Keep up the work.
 
Re: cb200 bratracker "lola"

nice wheel andy can we get them here in the land of aus?

i have new chromed spokes and the rim is the stock one just about to go get black powder coated. so it should look like bellow:
 
Re: cb200 bratracker "lola"

deepwaterimports said:
nice wheel andy can we get them here in the land of aus?

YES, it's a Melb company ;D and they have a warehouse in Nsw..


http://www.antiquetyres.com.au/
 
cb200 bratracker "lola"

Nice build man. I'm a coastie as well dude and just recently started a cb250rs build. Fun stuff
 
Re: cb200 bratracker "lola"

Nevergrew said:
just recently started a cb250rs build. Fun stuff

Nice, start up a thread I wanna see that build =)
 
cb200 bratracker "lola"

Engine is off at the restorers just about to get started so here is a before shot. Adam from rebel restorers even made a mounting stand for her. Steering bearings and tree are also coming together so ill put some of those pics up soon too.
 

Attachments

  • ImageUploadedByTapatalk1351824308.358133.jpg
    ImageUploadedByTapatalk1351824308.358133.jpg
    218.6 KB · Views: 260
  • ImageUploadedByTapatalk1351824322.540387.jpg
    ImageUploadedByTapatalk1351824322.540387.jpg
    172.7 KB · Views: 234
cb200 bratracker "lola"

Also have been told that powder coating is porous and if you don't put a clear over the top it may compromise the frame if it gets wet. ie rust gets under the powder. Anyone have any thoughts on this????
 
cb200 bratracker "lola"

Never heard that.

Factory frames are powdered.
My frame is powdered and no issues.
 
Re: cb200 bratracker "lola"

The dude may of been confused but I ain't taking that swing off again to repair/repaint it so we will just have to see.
 
cb200 bratracker "lola"

Got the tree together with nice Alan heads. Just have to shim the bush so I can finish rear shock. Other bits are at powder and after there done wheels will be re spoked and trued.
 

Attachments

  • ImageUploadedByTapatalk1352512068.267927.jpg
    ImageUploadedByTapatalk1352512068.267927.jpg
    160 KB · Views: 642
  • ImageUploadedByTapatalk1352512088.417791.jpg
    ImageUploadedByTapatalk1352512088.417791.jpg
    188.4 KB · Views: 605
Back
Top Bottom