crazypj
Split personality, I fake being smart
deviant said:Alright, what's the transmission looking thingy under the welding cord?
I noticed that as well and wondered, what is it?
deviant said:Alright, what's the transmission looking thingy under the welding cord?
'94 Ford A4LD 4x4 .deviant said:Alright, what's the transmission looking thingy under the welding cord?
woohoo new rubberkopcicle said:2.50-18 Borrani laced to KZ70B2 (twin) hub . 130/80-18 66P TT K180 . The 40 tooth sprocket is somewhat excessive .
Thanks again Matt .
~kop
pretty sexykopcicle said:a bit more work
~kop
lol the tinkererkopcicle said:So , I have these two Cp die grinders . One was an experiment into "porting the rotary air motor" . The usual hog out the passages and not so subtly alter the port timing so that the torque went away and the RPM was somewhere north of 25K . The other is near stock save for it usually wears the 3" cut off due to its torque .
So I built up a 2 1/2" mop out of 5 or 6 layers and stuck it in the 30K rpm die grinder ....
First trigger pull the mop exploded and for a instant I considered myself fortunate that the debris had somehow missed my face . I looked up to see a fair portion of the chamois wrap itself around a whip antenna and bend it near horizontal , directly away from me . In a near Warner Brothers cartoon moment I froze , waiting for the inevitable .
What didn't hit me full in the face ricocheted off into the air compressor belt guard , there to foul and dismount the belt with enough force to blow the guard off . The rest knocked my cigarettes off the the bench to be soaked by the last beer in the house also falling off bench .
it was worth telling
~kop