metalmike13
New Member
Got some 4 into 1 mac exhaust for my cb550 want to remove the baffles, but don't wanna fuk em up. already removed the rivet just wantin to know if anybody can give me some pointers before i proceed thanks
need help!!
- Thread starter metalmike13
- Start date
rockcitycafe
I make things.
pull hard.
the only thing holding the baffle assembly in the mac cans is the rivet(s), you can also try a stick from the other end and just knock it out with a hammer.
the only thing holding the baffle assembly in the mac cans is the rivet(s), you can also try a stick from the other end and just knock it out with a hammer.
metalmike13
New Member
dig I'll give it a try 2nite thanks bro!rockcitycafe said:
metalmike13
New Member
Here's a shitty cam phone pic bro I'll get a good one 2nite if I get a chance.Big R said:
