Up for sale from Slipstream Cycle Works is a set of bolt-on rear sets for the Honda CB350T. No frame modifications needed. Brake and shift rods are straight push/pull type rods, so they will not flex like rods with a bend in them. Stock kick start clears pedal and peg with no modification to the kick starter. The only modification necessary, will be to remove your stock shift lever and have our tab welded on (pictured with #1 on it). This includes pegs, levers, linkage, and the black brackets that are pictured. These machined brackets bolt directly in place of the stock brackets. You also have a bit of adjustability with the lever height in both the shifter and brake levers. These are custom made in the USA.
These are $215 shipped anywhere in the continental US. I realize they're a bit pricier than several on the market, but most of those just include the pegs and linkage and have you bolt them in the passenger peg holes. We've went a bit farther with customizing them, and making them look a bit better, in my opinion, anyhow.
Any questions, don't hesitate to ask, you can reach me at sales@slipstreamcycle.com.
As always, DTT members with a build thread will receive 10% off. Just shoot me a message with the link to be verified, and I'll send you a code.
These can be purchased through here, or I will have them up on the site tomorrow.
Thanks,
Jarred
These are $215 shipped anywhere in the continental US. I realize they're a bit pricier than several on the market, but most of those just include the pegs and linkage and have you bolt them in the passenger peg holes. We've went a bit farther with customizing them, and making them look a bit better, in my opinion, anyhow.
Any questions, don't hesitate to ask, you can reach me at sales@slipstreamcycle.com.
As always, DTT members with a build thread will receive 10% off. Just shoot me a message with the link to be verified, and I'll send you a code.
These can be purchased through here, or I will have them up on the site tomorrow.
Thanks,
Jarred