Hawk Concepts WIP

Roch48

Active Member
Here's the latest Dash I'm working on. This is currently made for the Cb450 but if there is enough interest I'd be willing to make it for other models as well. The small hole in the middle is for a bracket to hold the gauges in. As per usual These are waterjet cnc cut this one is powder coated black and it has 4 holes for mini leds. What do you guys think?

Note: This is bent slightly up.

5726481649_3c7c626cea_z.jpg

5726502739_d711657bd2_z.jpg
 
Back
Top Bottom