Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I'm a proud owner of a Honda CG 125, and writing from Portugal,
I really like my bike, but, as i don't like to have that "stock" bike, just as the same as others, i'm planing on do some mods (Sorry for the English),
So, this is the bike:
The deposit is from a MOTOZAX:
Allready done some cuts:
and now, is like:
Next, take the oils from the motor, and start the seat plate, and find a nice place to fit the turn lights
Been away for a long time,
Spending the time cleaning some very small asses
So, the bike is almost fully dissembled, just need to take the front suspension,
The seat plate is allready on its way, and i have allready a lot of parts,
Right now, this is the "test" pic:
the motor will be painted in black.
Will be doing a cleaning in the front fork, changing the dust seals and etc. any nice place to buy these parts ? (Europe based),
Been away from "The cave" for a while, Almost all of the parts have allready arrived (waiting for the shocks + light switches + brake levers), but, in my head, the final "picture" of the bike was a bit blured, so... Picked all the parts that i had, and put it on the bike, Really enjoying the result. The front fender will be "cutted" from the old one, allready have a sketch: .this week the wheels will be powder coated, i will show the final result!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.