collapse

* Laugh it up fuzzball

Refresh History
  • JustinLonghorn:
    Nov 11, 2018, 14:46:33
  • canyoncarver: :-0
    Nov 11, 2018, 16:34:05
  • advCo: Ouch
    Today at 09:39:30
  • Hurco550: that wouldnt have happened if he had an engine like God intended
    Today at 10:15:46
  • Maritime: Ha
    Today at 11:14:22
  • Maritime: I got the damn virago back together but it wont fire. Probably a bad connection now on harness. Need to check for spark. It turns over and has fuel so my lucknis I broke a wire to the xoils or something
    Today at 11:15:45
  • Maritime: Just want the fucker gone
    Today at 11:16:15
  • Maritime: Levi, love the new front whell and tire for the swamp donkey
    Today at 11:16:50
  • Hurco550: haha thanks man. I might have a bike that i can actually ride through the winter here haha Itll likely handle a little pooey, but ive seen videos of guys taking those bw200's through some serious stuff, im guessing itll be fine once i get used to it
    Today at 11:32:04
  • advCo: Believe it or not the van van handles pretty well with the ATV tires on it
    Today at 11:33:45
  • JustinLonghorn: Did you pick up another Van Van?
    Today at 11:36:57
  • advCo: Yep, a 90
    Today at 11:39:02
  • Hurco550: im curious to see how it doesn on pavement, but the plan is that pavement jaunts are short trips to get to the next trail anyways
    Today at 11:51:30
  • advCo: Yeah, thats what I mean, on pavement
    Today at 11:52:44
  • advCo: its a monster in the dirt. But actually really stable on pavement. Think I topped it out at ~40 mph and it wasnt even sketchy
    Today at 11:53:18
  • Maritime: Nice
    Today at 12:01:10
  • JustinLonghorn: I am on day three of working on my days off. I am debating buying a flipper bike or a Tig welder with the monies.
    Today at 12:07:42
  • JustinLonghorn: I also need to buy a new set of wheels for Etta's GT.
    Today at 12:08:23
  • Hurco550: buy a tig. thats my un biased opinion ;)
    Today at 12:28:05
  • irk miller: I need a TIG.  I want a TiG.  My life will get so much better when I own a TIG.
    Today at 13:03:45
  • canyoncarver: I want a Porsche, My life will get so much better when I own a Porsche.
    Today at 13:15:17
  • canyoncarver: I need a Porsche.
    Today at 13:15:28
  • canyoncarver: ;)
    Today at 13:15:55
  • advCo: We were messing around with that 914 my buddy bought yesterday. Needs some fresh gas and a battery
    Today at 13:38:04
  • Maritime: Tested viagra, no spark, so niw I get to trace wtf I did to fuck up the spark. I hate this bike
    Today at 14:09:51
  • Maritime: I hope its a fuse or some simple shit
    Today at 14:10:37
  • advCo: That thing just loves being in your shop
    Today at 14:12:53
  • Maritime: Ha, it needs to go home
    Today at 14:13:39
  • Maritime: Had to take a break. Foot still swells a bit if on it for very long
    Today at 14:14:19
  • advCo: Probably something simple
    Today at 14:21:39
  • advCo: Making a shopping list for the Z50 motor rebuild
    Today at 14:33:50
  • advCo: Couple bearings and a new clutch and we should be good to go
    Today at 14:34:22
  • Maritime: Well, got spark but still wont fire. Cocksucker. I may need more fuel, going to go get some
    Today at 14:44:46
  • Maritime: Nice on the z
    Today at 14:46:04
  • Hurco550: i dont have spark on the tw either, but i think my stator shit the bed. Im showing no resistance which makes me think its got a wire broke somewhere
    Today at 15:33:31
  • Hurco550: The strange thing is, even my spare reads the same. I wouldnt think the odds would be that great of having two shot ones sitting there, but who knows
    Today at 15:34:24
  • advCo: That is odd
    Today at 15:58:23
  • advCo: Is it a 2 coil stator, one primary and one for lighting?
    Today at 15:58:51
  • irk miller: How are you testing the stator?  It should not show continuity between any lead and ground.  You should get resistance between windings.
    Today at 15:59:31
  • irk miller: Also shouldn't show continuity between any lead and the stator body
    Today at 16:00:59
  • cxman: Stan lee died now what ?
    Today at 16:07:03
  • Maritime: RIP Stan. Sucks
    Today at 16:16:52
  • Hurco550: oh, well i was testing it between the two leads going to the cdi
    Today at 16:18:05
  • advCo: Does the manual give you a resistance chart? When I dealt with the FA50 stator they give you resistance values to check between the wires on each coil
    Today at 16:29:17
  • Hurco550: the manual says to read between the red and brown leads from the source coil and gives me a resisrance of 400-450 ohms
    Today at 16:37:38
  • Hurco550: resistance*
    Today at 16:37:56
  • advCo: and you're getting nothing on both? sure your voltmeter is on the right setting? lol..been there
    Today at 16:47:52
  • Hurco550: haha i have too, BUT i used the same setting to read both pickup coils i have, which both read within spec
    Today at 16:48:57
  • advCo: I guess its possible you have two bunk windings but seems pretty unlikely
    Today at 16:51:49
  • Hurco550: thats what was making me think i was testing something wrong. Seemed strange that they would both be fried, and from my research, it doesnt seem that they are a really super common failure point. Id rather it be a toasted stator than a toasted c.d.i. though, i can get a chinaman special stator for $60 shipped
    Today at 16:55:40

* Recent Pictures - click on picture to go to post

TT.JPG
Posted by: stroker crazy
buddies.JPG
Posted by: stroker crazy
IMG_2198.JPG
Posted by: irk miller
IMG_2197.JPG
Posted by: irk miller
PTDC0422.JPG
Posted by: Popeye SXM
sprockets 7.jpg
Posted by: Nebr_Rex
sprockets 6.jpg
Posted by: Nebr_Rex
sprockets 5.jpg
Posted by: Nebr_Rex
sprockets 4.jpg
Posted by: Nebr_Rex
sprockets 3.jpg
Posted by: Nebr_Rex
sprockets 2.jpg
Posted by: Nebr_Rex
sprockets 1.jpg
Posted by: Nebr_Rex
c6492b9d514f8bd0c332952f86f5a4a3.jpg
Posted by: canyoncarver
IMG_1248.jpg
Posted by: doc_rot
IMG_1247.jpg
Posted by: doc_rot
IMG_1324.jpg
Posted by: doc_rot
IMG_1325.jpg
Posted by: doc_rot
IMG_1322.jpg
Posted by: doc_rot
IMG_1316.JPG
Posted by: doc_rot
IMG_E1315.jpg
Posted by: doc_rot

www.dimecitycycles.com www.restocycle.com

www.bisonmotorsports.com

www.jadusmotorcycleparts.com www.Moto-Madness.com

www.speedmotoco.com www.cognitomoto.com

www.CITYLIMITMOTO.com www.townmoto.com