So winter is coming and I slownly need to figure a few things out with my stock 750.
All going very slowly since I´m currently building my own shed with all the stuff I need for future projects.
Here´s a question for you guys:
My camchain is making a "not smoothly running" noise and I think I need to check the adjustment of the auto-tensioner.
How do I do this?
Am I right to unscrew the cast part (1).Is there a pin like on the XS650 that needs to sit flush?
Does the screw (2) regulate the "stiffness" of the spring?
I guess (3) is the nut to bolt the whole down again.
A little lost here!
Thanks!
All going very slowly since I´m currently building my own shed with all the stuff I need for future projects.
Here´s a question for you guys:
My camchain is making a "not smoothly running" noise and I think I need to check the adjustment of the auto-tensioner.
How do I do this?
Am I right to unscrew the cast part (1).Is there a pin like on the XS650 that needs to sit flush?
Does the screw (2) regulate the "stiffness" of the spring?
I guess (3) is the nut to bolt the whole down again.
A little lost here!
Thanks!