low down cb500t bobber

jakeoff51

New Member
just got her running through all gears smoothly and figure its time i show her off a lill bit, please keep in mind this is my second bike and first hardtail, which runs nice and straight. pretty much everything on this bike is hand made or modified by me, if you have any questions pleas feel free to ask.your thoughts of the bike are extremely welcome as well. thanks
 

Attachments

  • done.jpg
    done.jpg
    110.5 KB · Views: 307
  • 46689_10152442062295461_1539129537_n.jpg
    46689_10152442062295461_1539129537_n.jpg
    75.1 KB · Views: 273
  • first day.jpg
    first day.jpg
    90.4 KB · Views: 296
  • 46850_10152442371735461_423082165_n.jpg
    46850_10152442371735461_423082165_n.jpg
    85.6 KB · Views: 297
some of my ghetto but did its job jig.
 

Attachments

  • 25916_10152510358000461_1158028288_n.jpg
    25916_10152510358000461_1158028288_n.jpg
    126.8 KB · Views: 456
  • 554328_10152445557115461_569233952_n.jpg
    554328_10152445557115461_569233952_n.jpg
    82 KB · Views: 297
  • 485374_10152510368515461_400095436_n.jpg
    485374_10152510368515461_400095436_n.jpg
    124.6 KB · Views: 452
  • 67929_10152445018715461_963150496_n.jpg
    67929_10152445018715461_963150496_n.jpg
    117.8 KB · Views: 293
it was made using some of the old bike and other metal laying around

the plugs i made were to adapt the factory tube to the .188 wal tubing... my local metal supplier didn't have 134 which is still fairly thick. also to make sure the joint is nice and strong
 

Attachments

  • 563206_10152543378260461_1834811652_n.jpg
    563206_10152543378260461_1834811652_n.jpg
    90.8 KB · Views: 296
  • 604151_10152538077260461_110523564_n.jpg
    604151_10152538077260461_110523564_n.jpg
    70.1 KB · Views: 284
  • 154871_10152538077910461_1566299728_n.jpg
    154871_10152538077910461_1566299728_n.jpg
    63.6 KB · Views: 445
  • 65519_10152538076815461_1538226230_n.jpg
    65519_10152538076815461_1538226230_n.jpg
    83.3 KB · Views: 433
hardtail done
 

Attachments

  • 379179_10152547029180461_890496905_n.jpg
    379179_10152547029180461_890496905_n.jpg
    101 KB · Views: 442
  • 18515_10152546760090461_532946123_n.jpg
    18515_10152546760090461_532946123_n.jpg
    89.9 KB · Views: 282
  • 551473_10152547074395461_183006391_n.jpg
    551473_10152547074395461_183006391_n.jpg
    88.5 KB · Views: 295
heres some of the brackets and tabs
 

Attachments

  • 11186_10152588731470461_1025176065_n.jpg
    11186_10152588731470461_1025176065_n.jpg
    88.3 KB · Views: 291
  • 281994_10152592218125461_1992490951_n.jpg
    281994_10152592218125461_1992490951_n.jpg
    88.5 KB · Views: 281
  • 72409_10152592218550461_1156673205_n.jpg
    72409_10152592218550461_1156673205_n.jpg
    84.6 KB · Views: 286
  • 540860_10152588737085461_608144830_n.jpg
    540860_10152588737085461_608144830_n.jpg
    87.3 KB · Views: 285
electrical tabs and tank mounts
 

Attachments

  • 581716_10152605033540461_102169784_n.jpg
    581716_10152605033540461_102169784_n.jpg
    71.4 KB · Views: 440
  • 601207_10152604998630461_520715550_n.jpg
    601207_10152604998630461_520715550_n.jpg
    65.5 KB · Views: 434
  • 576227_10152592215940461_311534880_n.jpg
    576227_10152592215940461_311534880_n.jpg
    78.5 KB · Views: 422
  • 644620_10152592217150461_51431675_n.jpg
    644620_10152592217150461_51431675_n.jpg
    86.7 KB · Views: 424
here is tghe brake linkage and kick stand, i opted to be the odd ball and kick it to the right, plus the oil pick up is on the right so figured it can idle real nice with it 100% submerged
 

Attachments

  • floating seat mount.jpg
    floating seat mount.jpg
    81.2 KB · Views: 463
  • 480008_10152611966875461_374949894_n.jpg
    480008_10152611966875461_374949894_n.jpg
    106.8 KB · Views: 435
  • 306241_10152615056125461_511307452_n.jpg
    306241_10152615056125461_511307452_n.jpg
    98.2 KB · Views: 293
  • 313406_10152588730060461_1639951554_n.jpg
    313406_10152588730060461_1639951554_n.jpg
    82.2 KB · Views: 285
rattle can painted for now, just incase i feel like changing things
 

Attachments

  • 733776_10152618971505461_722254938_n.jpg
    733776_10152618971505461_722254938_n.jpg
    100.1 KB · Views: 282
  • 316767_10152618655265461_1333604806_n.jpg
    316767_10152618655265461_1333604806_n.jpg
    93.1 KB · Views: 279
  • 482316_10152609359590461_805951610_n.jpg
    482316_10152609359590461_805951610_n.jpg
    78.2 KB · Views: 287
  • mock up done.jpg
    mock up done.jpg
    108.9 KB · Views: 295
starting to get to the point
 

Attachments

  • 31909_10152627880630461_1139476455_n.jpg
    31909_10152627880630461_1139476455_n.jpg
    95 KB · Views: 294
  • 483370_10152676162145461_21625354_n.jpg
    483370_10152676162145461_21625354_n.jpg
    83.1 KB · Views: 462
  • 483698_10152633325935461_1772671453_n.jpg
    483698_10152633325935461_1772671453_n.jpg
    94.8 KB · Views: 472
  • 733989_10152633323910461_683559687_n.jpg
    733989_10152633323910461_683559687_n.jpg
    91 KB · Views: 301
got some power goin, forgot to mock up a batt box so had to make one while it was painted. thank god i didnt put 200 bucks of pant or powder coating on it.
 

Attachments

  • 68582_10152693807570461_979748141_n.jpg
    68582_10152693807570461_979748141_n.jpg
    70.8 KB · Views: 468
  • 73343_10152694652595461_1569805048_n.jpg
    73343_10152694652595461_1569805048_n.jpg
    70.3 KB · Views: 266
  • 561406_10152688788660461_1498240857_n.jpg
    561406_10152688788660461_1498240857_n.jpg
    98 KB · Views: 449
added two 1/4 npt bungs to the tank, lined it with some red kote. get her to fire up and sure enough, 1st and 5th gear were toast. so it came back apart,
 

Attachments

  • 181005_10152691466780461_890917400_n.jpg
    181005_10152691466780461_890917400_n.jpg
    62.2 KB · Views: 453
  • 524288_10152695568675461_683051701_n.jpg
    524288_10152695568675461_683051701_n.jpg
    90.8 KB · Views: 257
  • 553833_10152694653210461_1061752885_n.jpg
    553833_10152694653210461_1061752885_n.jpg
    102.9 KB · Views: 244
  • 64290_10152694653045461_1151652687_n.jpg
    64290_10152694653045461_1151652687_n.jpg
    113.6 KB · Views: 616
some of the gears this was the junk set, luckily im smart enough to buy these motors up when i find them. also went to my local ace hardware and got me all allen head bolts for both side covers, i'll do the cam covers over the sumer while taking care of a few other things. thanks for looking
 

Attachments

  • 319981_10152707285975461_1299959445_n.jpg
    319981_10152707285975461_1299959445_n.jpg
    122.6 KB · Views: 580
  • 531866_10152708058335461_1496880519_n.jpg
    531866_10152708058335461_1496880519_n.jpg
    110.3 KB · Views: 603
  • 65664_10152711771565461_277850623_n.jpg
    65664_10152711771565461_277850623_n.jpg
    100.3 KB · Views: 257
  • 544190_10152711779195461_271983973_n.jpg
    544190_10152711779195461_271983973_n.jpg
    128.4 KB · Views: 245
Back
Top Bottom