DIY LED Dashboard Indicator Lights

Sonreir

Oregon
DTT SUPPORTER
These component LEDs come in a pack of four (one blue, one green, one red, and one yellow) and are compatible with 12V systems.

Intended to be used by builders who are looking to create their own dashboard setups, these LEDs include a black plastic bezel so they can be mounted in sheet metal or even in the tops of triple trees.

Cost is $8 per set and shipping within the USA is free.

They can be purchased from our website at http://www.sparckmoto.com/products
 

Attachments

  • IMG_2133.JPG
    IMG_2133.JPG
    643.1 KB · Views: 309
Decent. I will surely see some of those on my workbench in the near future.

Can you tell us the diameter of hole that will be optimal to house them? Thank you.
 
DohcBikes said:
Decent. I will surely see some of those on my workbench in the near future.

Can you tell us the diameter of hole that will be optimal to house them? Thank you.

Just a hair over 9mm.
 
Back
Top Bottom