CB350 Scrambler Siblings

Engine #2 going together.
f6e3ba70764a410e6c462d19ffa372fa.jpg
 
Engines ready for install and another look at the paint. Just waiting for the frames to come back from powder coat to start final assembly.

446e3dcd12cf69c63d33bd1d79b78bf8.jpg


ca469208a58c0e7cafdd2291cbca37f2.jpg
 
I've been waiting on my frames to come back from powder coating, so I've been doing little odds and ends so assembly will be a bit faster.

I did machine some aluminum lower fork seats for the powder coated forks. The coating prevented the originals from fitting so I turned these down on the lathe. I like them, they have a bit of a more modern feel.

c64677c61c6b13bf066187b6d4c6ee51.jpg


269b4a9c2b885d6ef6929732eb577151.jpg


76f8752865552e47a705620606214863.jpg
 
CrabsAndCylinders said:
Your work continues to impress!

Thank you. I'm just trying to deliver a good product.

jag767 said:
Nick those look great- perhaps top ones to match?

I did. But, I like the look of the stock uppers as seen on the left fork.

edef14bd6e6ac859ddbd2258292ae147.jpg
 
Also made the stainless headlight mounts. Good thing I have this mock-up frame to keep things going while the actual frames are at powder coat.

e7a95e17e29a22a316e564a3de41c17f.jpg

121a2233517839c5a08a05d8df2ba481.jpg

d4bad0ad42b51b7e01317be780ba5640.jpg
 
More assembly, and started the wiring harnesses. With some luck, these will be road ready by the end of the week....

df5e956bf6838cb84c8a1f9263af4c60.jpg


8c72757acddbe53445fe503f908257e8.jpg


55c634dab4e5f87a3b61a539ba7408e9.jpg
 
Fantastic! Just found your post, i'm building a brat/scrambler with my cousin, it's gonna be his first bike. It's a Honda ML125 1983, and i'm seeing a lot of resemblances between our projects, including the rear led lights, tires.. following! Keep the good work!
 
Back
Top Bottom