2.3efi
Been Around the Block
Started piecing together the build today and though I would share with you guys.
Background: Picked up this CL360 with a little over 3,000 miles on the clock. The carbs were gummed up and the stator cover had a nice crack in it, but the bike was a great starting point.
Did a lot of trimming on the frame and replaced some of the stock gussets with stronger cross bars instead. Also welded in a rear hoop for the seat.
Started to mock it up today, the frame still needs to be be sent out for powder coating and the the cl pipes are going to be black ceramic coated.
Background: Picked up this CL360 with a little over 3,000 miles on the clock. The carbs were gummed up and the stator cover had a nice crack in it, but the bike was a great starting point.
Did a lot of trimming on the frame and replaced some of the stock gussets with stronger cross bars instead. Also welded in a rear hoop for the seat.
Started to mock it up today, the frame still needs to be be sent out for powder coating and the the cl pipes are going to be black ceramic coated.