Cb160 exhaust options

Just probing for answers for those of you who have had to replace mufflers on a cb160. the header OD is very small, 1-1/4". I can't find anything that small in universal mufflers. any suggestions?

I lucked into a set of old pipes with a removable cap on the end. But when I was looking, I considered going with some of the Asian (Thai or Vietnamese) repops that look close to original, or at least old looking. They seem relatively cheap, but I honestly know nothing about feedback on em, but that's what feedback on Ebay is for I guess. JC Whitney exhaust tips for VW bugs was something else I considered -- someone here used em on a 350F -- but the diameter might be off and you might need to use something to convert it.

I used the dunstall replicas from DCC with the old red rubber gasket to make up the difference. Will need to re jet with those.

clem said:

I used the dunstall replicas from DCC with the old red rubber gasket to make up the difference. Will need to re jet with those.

Click to expand...

awesome. Can you post a picture?

Cone engineering


Sent from my iPhone using Tapatalk

Please post pictures if you have them.