* Laugh it up fuzzball

Refresh History
  • Maritime: Yep, is Cassy breastfeeding? If so there will be lots of stops LOL
    Dec 12, 2018, 14:43:33
  • Maritime: we took William to NH which is a 5 hour drive, it took 9 with all the feed and diaper stops
    Dec 12, 2018, 14:44:22
  • Maritime: our trip home is normally 2 hours. it will take 3-4 I bet with her being a whole month old by then
    Dec 12, 2018, 14:45:11
  • Hurco550: yeah, we are hoping to drive through the night. On all the car rides so far Lenny just falls asleep, and during the night at home he usually sleeps for 5-6 hrs at a time. Were hoping to get at least one 5 hour stretch in if we can. Packed up, ready to go, and when he zonks out we hit the road
    Dec 12, 2018, 15:31:40
  • irk miller: Safe travels, homie.  I don't miss traveling with infants.
    Dec 12, 2018, 17:14:45
  • irk miller: I also don't miss diapers. LOL
    Dec 12, 2018, 17:15:02
  • JustinLonghorn: Morning muchachos.
    Dec 13, 2018, 07:39:44
  • Maritime: Morning.
    Dec 13, 2018, 09:01:52
  • Maritime: Canada post strick is fucking with christmas. William may end up with a picture of his presents under the tree this year
    Dec 13, 2018, 09:02:35
  • Maritime: *Strike
    Dec 13, 2018, 09:02:43
  • Maritime: I actually ordered some of them in Canada because they were a little cheaper. but I should have paid 10-20 more and got them US side, they'd be delivered by now
    Dec 13, 2018, 09:03:38
  • irk miller: Oh man.  That's stressful.
    Dec 13, 2018, 09:15:22
  • irk miller: The big gifts for our girls this year is Oscar Schmidt 3/4 dreadnought acoustic guitars.  I'm psyched.  Edy requested a guitar with red flames.  I freakin love that kid.
    Dec 13, 2018, 09:17:21
  • irk miller: Had to go 3/4 because finding a 1/2 size left hand guitar is impossible.
    Dec 13, 2018, 09:18:25
  • Maritime: Nice, Magoo is getting a GTX1070 GPU and a new 24" gaming monitor for his PC
    Dec 13, 2018, 09:26:23
  • Maritime: The monitor will make it in time the GPU may not
    Dec 13, 2018, 09:26:41
  • Maritime: oh yeah and it's -21F here today
    Dec 13, 2018, 09:29:00
  • Maritime: Nice fix on the bucket Irk
    Dec 13, 2018, 09:33:11
  • irk miller: Thanks!
    Dec 13, 2018, 09:35:00
  • Maritime: I had that same bucket on the GL before deer. It was supposed to be in a fairing I liked it cause it tucked right up tight, didn't stick way out
    Dec 13, 2018, 09:37:46
  • Maritime: I did have to move some of the wires out to another spot but no big deal/
    Dec 13, 2018, 09:40:54
  • JustinLonghorn: I like the headlight in black, Irk.
    Dec 13, 2018, 09:57:57
  • Maritime: I'm 50/50 on it right now, I like both but need to see the bike more together before I chose
    Dec 13, 2018, 10:25:39
  • Maritime: Choose
    Dec 13, 2018, 10:25:42
  • advCo: Mornin'
    Dec 13, 2018, 10:48:17
  • Maritime: Mornin, the 2 1/2" stright bit is out for delivery, should be able to dress the boards tonight
    Dec 13, 2018, 11:01:07
  • Maritime: I looked at my bits, the rabbit bits won't work for the slots. they are for top edge. I am not going to be able to cut the slots mid way down. If I still have some dowels for my tool I'll use it but otherwise the bar clamps and gorilla glue will have to do
    Dec 13, 2018, 11:02:55
  • advCo: Ahh yeah. I had a slot cutter bit with interchangeable blades that you can change the height
    Dec 13, 2018, 11:13:21
  • advCo: You'll be fine just gluing it up
    Dec 13, 2018, 11:13:41
  • irk miller: I'm leaning towards black, too.  I think it will make more sense when it's all painted.  The bike won't have any other chrome, so the bezel will just stand out even more.
    Dec 13, 2018, 12:12:25
  • irk miller: Another option is to scotchbrite the chrome, so it'm more like aluminum.
    Dec 13, 2018, 12:14:28
  • advCo: I think it looks good either way. I like a little chrome. Fork stanchions help it blend in
    Dec 13, 2018, 12:25:46
  • Maritime: I know the glue and clamps willl be fine, I just need to make sure to alternate clamps above and below to keep it from wanting to arch.
    Dec 13, 2018, 13:11:42
  • Maritime: And the black looks ok and the chrome looks ok, but untill the bike is all back together and painted etc I reserve the right to give my opinion then LOL
    Dec 13, 2018, 13:12:29
  • advCo: Mornin fellers
    Today at 10:09:49
  • Hurco550: mernin champ
    Today at 10:14:02
  • advCo: Whats the word
    Today at 10:16:03
  • Maritime: The bird
    Today at 10:23:18
  • Maritime: Got the desk top glued, had one spot the router bit split on me, there was a flaw I didn't know was there but I will be able to fill it and make it work
    Today at 10:24:06
  • Maritime: Pull the clamps tonight and do the finish sanding
    Today at 10:24:35
  • Maritime: Trim and true the ends and hit it with a finish of some kind, don't think I
    Today at 10:25:13
  • Maritime: 'll go with the epoxy, thats a bit overkill
    Today at 10:25:29
  • advCo: Yeah, I never really like the high gloss look of epoxy
    Today at 10:42:41
  • advCo: I like the wipe on semi-gloss or high gloss
    Today at 10:43:04
  • advCo: Wipe on poly* I think i said that the other day
    Today at 10:49:28
  • Maritime: That's what I think I am going to grab. couldn't find it local so I am hoping to find it tonight in Maine, got to go pick up parts and presents we ordered LOL
    Today at 10:52:21
  • advCo: Nice! Minwax makes my favorite wipe on poly. 3-4 coats should be pretty good
    Today at 10:54:58
  • Maritime: actually just did another search and found it, so can grab that tonight and should get the desk finished on the weekend.
    Today at 10:55:06
  • advCo: Sweet
    Today at 10:57:09
  • advCo: I just wipe it on lightly with a rag in small circular pattern. Hit it lightly between coats with 220
    Today at 10:57:46

* Recent Pictures - click on picture to go to post

Posted by: irk miller
Posted by: irk miller
Posted by: irk miller
Posted by: irk miller
Posted by: irk miller
Posted by: stroker crazy
Posted by: pitobread
Posted by: canyoncarver
Posted by: irk miller
Posted by: irk miller
Posted by: irk miller
Posted by: irk miller
Posted by: MandoSteve
Posted by: irk miller
Posted by: irk miller
Posted by: irk miller
Posted by: irk miller
Posted by: Kanticoy
Posted by: imwastefull
Posted by: imwastefull