surffly
Over 1,000 Posts
been a long time lurkers but thought i should start a thread
this has been a very long build for me. school work and life just keep getting in the way....
as she started
CR tank with spray bomb job
new paint. nissan/infinity black metalflake
frame has been powder coated in a dark red/marroon.
progressive front and rear suspension
TTR400 parts
-pre loaders
-top nut
-chain adjustors
-oil nut
-head light ears
dyna 2000
dyna 2.2 coils
hondaman resistors
Tarozzi rearsets
Tarozzi front fork brace
XSmike fork cartridge
swing arm needle bearings
all balls wheel bearings
all balls steering bearings
Cycle X front forks
Gordon frame kit
airtech CR750 tank and seat
Daytona steering damper
lester mag wheels
-19 front
-18 rear
1982 honda OEM twin piston calipers
W clipons
handle bar mounts shaved
all clips and such were cleaned and shaved off frame
every nut and bolt has been cleaned or replace
seals and rubber parts were replaced with OEM parts
dunlop GT501 tires
Trailtech Vapor digital dash
DDM HID headlight
glass from the past front dustall fender
havent even started on building a motor to go with the build, just have a solid stocker for now.
sitting on my IKEA motorcycle stand
Second floor apt...lol
parts back from the coater
Forks are being build next. will have more pics
really like these Tarozzi parts
Tank sitting on frame
got the oil tank painted and installed.
mounted the trail tech dash
just got in my finned starter cover to go with some other finned parts for the motor
also some other cool bits from TTR400
this has been a very long build for me. school work and life just keep getting in the way....
as she started
CR tank with spray bomb job
new paint. nissan/infinity black metalflake
frame has been powder coated in a dark red/marroon.
progressive front and rear suspension
TTR400 parts
-pre loaders
-top nut
-chain adjustors
-oil nut
-head light ears
dyna 2000
dyna 2.2 coils
hondaman resistors
Tarozzi rearsets
Tarozzi front fork brace
XSmike fork cartridge
swing arm needle bearings
all balls wheel bearings
all balls steering bearings
Cycle X front forks
Gordon frame kit
airtech CR750 tank and seat
Daytona steering damper
lester mag wheels
-19 front
-18 rear
1982 honda OEM twin piston calipers
W clipons
handle bar mounts shaved
all clips and such were cleaned and shaved off frame
every nut and bolt has been cleaned or replace
seals and rubber parts were replaced with OEM parts
dunlop GT501 tires
Trailtech Vapor digital dash
DDM HID headlight
glass from the past front dustall fender
havent even started on building a motor to go with the build, just have a solid stocker for now.
sitting on my IKEA motorcycle stand
Second floor apt...lol
parts back from the coater
Forks are being build next. will have more pics
really like these Tarozzi parts
Tank sitting on frame
got the oil tank painted and installed.
mounted the trail tech dash
just got in my finned starter cover to go with some other finned parts for the motor
also some other cool bits from TTR400