Cb750 parts needed!!!

My motor is in the shop getting rebuilt and of course much more needed to be done then originally thought. I got a what I think is to be a pretty pricey parts list from the shop and was hoping you guys know where I can get these parts for a little less....

"Got to looking around for those parts and putting quotes together, this is what I came up with these numbers

You need new exhaust valve guides, and valves
- Valve Guides Guides Exhaust - KPMI - 4 - 115
- Valves - Vesrah Exhaust - 4 - 135
- Rocker arms and spindles - set - 120
- Dynoman Cam Regrind - 255
- Pistons and rings .25 Over - Honda OE - 780 ( option a )
- Pistons and rings .25 Over - Aftermarket - 220 ( option b )
- Pistons and rings JE 836 Performance kit - 875 ( option c )

(all three piston options require boring of the cylinders, typical 35-50$ per cylinder)

All of these are outlined in the invoice, as is the labor we have performed thus far. These prices include a 15% markup for parts that we order from online vendors that are out of our distribution network. A good resource for you to look at to see these parts is dynomanperformance.com"


Also any thoughts on this piston kits.. http://m.ebay.com/itm/301336723663?nav=SEARCH

Thanks guys!!

Hi there.

I think you are located in the US?

If so, try Cycle X http://cyclexchange.net/

They are Honda CB750 specialists.

Tell them that SDG Moto from Australia sent you (we are their Aussie distributor)

Cheers
Scott
SDG Moto Custom & Cafe
http://www.sdgmoto.com.au

Yeah I was looking into the cycle x cams but trying to keep this price down...all this work was very unexpected

Any help would be greatly appreciated guys! Need to contact the shop in the next day or so.

Sorry I didn't reply to your PM, only just found it.
Have you asked on SOHC4.net?
That is probably the best place for any 'race parts information.
I have couple of sets of 0.75mm oversize pistons but no rings, etc

Posted on sohc and managed to get everything needed and then just bought the 811 kit!