CB360 Jetting

M

motormayhem

Active Member
Running pods with 112 secondary mains. Idles great, is ok off the line with some sputtering like its rich, and then takes off and sputters around 5k and then pulls better after 6. Plug chop looks about the same at 5k and 9k as pictured below. I'm thinking drop to 110's and call it a day?
 

Attachments

  • IMG_2547.JPG
    IMG_2547.JPG
    1,011.2 KB · Views: 178
  • IMG_2548.JPG
    IMG_2548.JPG
    835.2 KB · Views: 170
The first and most important step to get her running properly w pods, you need to send the carbs down to crazyPJ for cleaning, inspection, modifications and set up.
 
trek97 said:
The first and most important step to get her running properly w pods, you need to send the carbs down to crazyPJ for cleaning, inspection, modifications and set up.
Click to expand...

I dropped the 110s in and set the float to 19.5mm and it's pretty happy. Smooth from 3.5k to 9k and a little rich between idle and 3.5k but not too bad. Think that's the combo that my current setup likes.
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom