Re: Yet another CB360 ( or two?)
got to do a little bit, wife just wanted me to stay out of her way while cooking ;D
Rocan was asking about polishing top yoke so I did some work on mine (and bottom yoke got some 'treatment'
)
Heres what it looked like when I started
back view showing parting line, I drilled and tapped boss for steering damper
Cut off steering lock and spent a bunch of time with angle grinder then a lot of time with files and emery cloth
Heres the back side, almost finished
Modified top yoke as well, cut of instrument mounts, can use handlebar holes with tube nuts for speedo/rev counterand possibly fit LED inside tube nut?
Showing why you cant go dirctly from 240 grit to polishing, its shiny but all the scratches are visible (wifes friends husband was impressed, until he had it explained, ooh, shiny :
)
Its got to have a lot more going over with finer emery cloth before being polished
This is the 4th one so far, 2 Suzuki, 1 Yamaha, first '360'
Lot of people may wonder why I jump around with parts and pieces so much?
I'm working on whatever part I pick up, what I feel like doing or, have some time to 'play' with.
Its all got to be done so doesnt matter where I am as long as it all comes together at the end.
I know where stuff goes and what it does so I dont have to do multiple builds and fits
I do all my bikes like this, (when I decide to work on them,
)
so, its not an 'all out' build for me, just a 'normal' one
PJ