recently got a sweet kz650 cafe project from craigslist and started looking into the seized engine. discovered #2 piston was completely seized and the rings are locked up. im gonna replace all the rings and hone the cylinders but not sure if i have found the correct rings
i found these (http://www.ebay.com/itm/162076951175) on ebay but im unsure of the fitment. i dont know exactly what measurements i need. its a kz650D with untouched engine so im assuming that these "standard" rings are what im looking for... just need some reassurance by the experts ;D
also while i have the top end off is there anything else i should replace while im in there? ive heard valve seals are a pretty good thing to replace at a time like this. thanks in advance!
i found these (http://www.ebay.com/itm/162076951175) on ebay but im unsure of the fitment. i dont know exactly what measurements i need. its a kz650D with untouched engine so im assuming that these "standard" rings are what im looking for... just need some reassurance by the experts ;D
also while i have the top end off is there anything else i should replace while im in there? ive heard valve seals are a pretty good thing to replace at a time like this. thanks in advance!