I'm running these (also available in other colour ways)bubonicplay said:Not sure where this is mentioned but what kind of shocks are you running?
mikeyw64 said:Is anyone here in the Brisbane area?
Someone off a Bird forum is considering selling his ZZR1100 to fund an Ace
Ah just realised ChrisBNE is up there, will tell Ian to set an account up & get in touch
ACEitup said:CAT removed ;D
header pipe extended and megaphone fitted
bought a smile to my face immediately
with power increase but was surprised
top speed still 90 k's?
Will finish off pipe with a titanium wrap
also might have to tinker with baffle?
cheers ACEitup
ChrisBNE said:I can do 100-105
ChrisBNE said:must be my 85kegs slowing it up
ChrisBNE said:I'm same weight as you buddy and I'm a broad mofo. Don't get me wrong, as soon as a hill comes along all bets are off!
cafe59 said:Anyway my Ace has finally arrived!!! Stoked!!!
sprocket2cog said:you dont need the whole of the ooracing kit unless you want to get it all, you can make do just getting the jets , the blanking plate and a front sprocket with 17 teeth, then you dont need to shorten the chain, which you need to do if you change the rear to a smaller one.
stroker crazy said:Hope to see you on a run soon.
cafe59 said:I am ordering the stuff from OORacing you have recommended:
- Product Code: 7329 - EGR Cylinder head exhaust emission blanking plate
- Product Code: 8685 - Re jet kit for Skyteam ACE 125 using standard air box
But I am not sure which sprocket is the right one:
Product Code: 0957 - 14T 15T 16T 17T 18T 428P 17mm shaft Front Sprocket (17T)
or
Product Code: 0960 - 15T 16T 17T 428P 20mm shaft Front Sprocket (17T)?
Also I would like to put on new set of tires (it was quite wet when I took her for the first ride and had quite nasty rear wheel skid), but I would like something a little bit chunkier - do you guys think I can put front 3.00 and rear 3.50 on? Or it must be 2.75 front and 3.00 rear? Any suggestion which tires to choose? I would like something classic looking - TT100 pattern kinda style - I was thinking Dunlop K82, but not sure whether you can get these here in Oz/
Thanks for your help!
Thomas
cafe59 said:I am ordering the stuff from OORacing you have recommended:
....
But I am not sure which sprocket is the right one:
Product Code: 0957 - 14T 15T 16T 17T 18T 428P 17mm shaft Front Sprocket (17T)
or
Product Code: 0960 - 15T 16T 17T 428P 20mm shaft Front Sprocket (17T)?
....
Thomas
Anyone got any suggestions? as toChrisBNE said:I'm same weight as you buddy
I think Wayne got that from Thailand'sprocket2cog said:that red screen