Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Yup....lowered bars now my brake lever won't rotate down. Looking for a decent priced replacement. Never shopped for one before so kinda lost on what to look for....thanks
There is a pin on the inside of the brake part that goes around the handlebar. Loosen it right off, find the angle that fits your stance, then drill another alignment hole in the handle bar.
So most metric bike use a 10 MM banjo bolt. Pretty much any MC will work that has this connection. I would stay with ones for single discs if you have a single disc, or one for double discs if you have a double disc.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.