1981 Honda CM400 E Part-Out

Drey6

Over 1,000 Posts
Moving in a week, it's happening too fast- I need to shed the fat!

OFFERS ACCEPTED!

CLEAN Ohio Titled Frame/roller
Fresh fork seals installed.
•Tank with no rust stripped, clearcoated to keep off rust.
• Complete stock wiring harness
•Airbox with brand new KN stock filter
•Intake Boots (new)
•Mac 2-1, welded on Emgo Shorty muffler, header wrap.
• Carbs (in pieces, were soda blasted)
• Motor soda blasted (in pieces due to ongoing rebuild, all threads tapped and very clean (new piston rings on hand, gasket kits, bearings etc.) ready for a rebuild or I can part out individual stuff if needed. Also have a kicker shaft, springs (all internals for install), kicker arm and 78 Sidecover to replace the 81 since it had no kicker. Cases are machined the same so it's all there to install.
•New all balls front wheel bearing kit
•4 new KN Oil filters

Lots of other stuff.

Let me know what you need, like I said- moving very soon! I'll be at Mid-Ohio for the whole weekend so if you are going there and are 100% interested in purchasing something- we can make it happen in person.
833d79a4c01751a92e2c795ff529a1d0.jpg
be58565931b8ef1f2593262ac3b2166d.jpg
7f6f71a0748bd2964e546466daa059a1.jpg
61c598223e002a54898aec06fa5c70eb.jpg
5998e2b82d3d894032a9f01bd660727e.jpg


OFFERS ACCEPTED!
aced4bc0e6dc126c9c75e5800b0a57c4.jpg
ab0ba910cc88e579b38130884aa44f58.jpg



Sent from my iPhone using Tapatalk Pro
 

Attachments

  • IMG_2935.JPG
    IMG_2935.JPG
    1.5 MB · Views: 154
Back
Top Bottom