Hey there guys, I have a TS250 that was hotwired by the previous owner (no it't not stolen) and I am looking to redo the wiring harness when I replace the ignition. From what I've found online stock ignitions are $100 and I don't really want to spend that much so I just picked up a 3 wire universal ignition.
First question is this. The stock unit is 6 wires (see wiring diagram), and as I said before the universal I got is 3. Will this work, and if so what should I be hooking up to the ignition. And secondly, what is the feasibility of doing a 12v conversion? I have read the bike makes enough stock so I wouldn't have to do a step up circuit or anything, but I don't know if this is actually true.
First question is this. The stock unit is 6 wires (see wiring diagram), and as I said before the universal I got is 3. Will this work, and if so what should I be hooking up to the ignition. And secondly, what is the feasibility of doing a 12v conversion? I have read the bike makes enough stock so I wouldn't have to do a step up circuit or anything, but I don't know if this is actually true.
