collapse

www.dimecitycycles.com


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.lostapostlejewelry.com

www.cognitomoto.com

www.townmoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com

QUESTIONS ABOUT THE SITE? TROUBLE REGISTERING? ADMIN@DOTHETON.COM

Author Topic: sr250 first build, I know nothing at all.  (Read 7543 times)

Offline Beerslinger

  • Posts: 32
Re: sr250 first build, I know nothing at all.
« Reply #60 on: May 11, 2016, 03:14:21 »
Is there any specific way I should mark the cam so as to remember it's position, like a grease pencil, or is it not required and only goes in one way?

Sent from my LG-H812 using DO THE TON mobile app


Offline cosworth

  • Posts: 561
Re: sr250 first build, I know nothing at all.
« Reply #61 on: May 11, 2016, 03:42:31 »
Take the left cover off, the stator cover. Keep it at TDC. The crank that is.

So with the cam cover off, you'll see a timing mark on the cam gear and the corresponding mark on the head. Keep the chain from falling down and once you inspect the cam, take pics and post them here. P

Assembly of the cam should be easy since all you have to do is line the marks up again.
1981 SR250 café hot rod (sold)
1976 XS360 collector plates
1980 XS400 (on the bench)
1981 XS400 (in pieces)
2017 Husqvarna 701 enduro
Livin' the dream in western Canuckistan

Offline JadusMotorcycleParts

  • DTT SUPPORTER
  • *
  • Posts: 848
    • Jadus Motorcycle Parts
Re: sr250 first build, I know nothing at all.
« Reply #62 on: May 12, 2016, 17:07:43 »
Cool to see you getting stuck in man.  Heaps of guys with good advice here.  And sweet Cosworths bike is inspiration, its a mint one  8)

Offline Beerslinger

  • Posts: 32
Re: sr250 first build, I know nothing at all.
« Reply #63 on: May 12, 2016, 17:17:40 »
I stopped by his place last week to take a look. It's even nicer in person.  Hell of a nice guy too

Sent from my LG-H812 using Tapatalk