collapse

www.dimecitycycles.com


www.restocycle.com

www.CITYLIMITMOTO.com

www.jadusmotorcycleparts.com

www.bisonmotorsports.com

www.speedmotoco.com

www.cognitomoto.com

www.townmoto.com

www.sparckmoto.com

www.Moto-Madness.com

www.pistonsociety.com

www.steeltowngarage.com

GET DTT UPDATES ON FACEBOOK AND TWITTER

Author Topic: 1998 Gsxr 750 build  (Read 4878 times)

Offline DesmoDog

  • Posts: 250
Re: 1998 Gsxr 750 build
« Reply #70 on: Mar 20, 2018, 16:13:56 »
The charging protection built into the EarthX is nice but not bulletproof. IMHO you need a volt meter and a fully functioning modern regulator to go along with it.

I melted one down when the regulator on my 1991 851 went bad. Expensive lesson to learn.

Offline 1fasgsxr

  • Posts: 1338
Re: 1998 Gsxr 750 build
« Reply #71 on: Mar 21, 2018, 07:42:22 »
EarthX on the way.  Thanks Sonreir

Offline 1fasgsxr

  • Posts: 1338
Re: 1998 Gsxr 750 build
« Reply #72 on: Mar 21, 2018, 20:46:00 »
Did this earlier but never posted pics....had one bungee hook broke so off with all of them...

Offline 1fasgsxr

  • Posts: 1338
Re: 1998 Gsxr 750 build
« Reply #73 on: Apr 13, 2018, 17:52:32 »
Try this again.... >:(  getting my wheels ready for some paint...

Offline canyoncarver

  • DTT SUPPORTER
  • *
  • Posts: 3388
  • 'hacking is learning'
Re: 1998 Gsxr 750 build
« Reply #74 on: Apr 13, 2018, 19:40:05 »
Progress!

I was looking into local powder guys for my wheels.  Around 200-250 for a set of bike wheels, including all prep and materials. I figure thats about reasonable for a quality powder coat job.  Just the same, I might try paint too,  don't have to remove the bearings and you save a fair bit of cash. 

Are you blasting them first or a sand and clean?
--
KZ400 The Rabbit
YZF750/1000R The Fly
KZ 750 Twin
ZRX 1100
65 Norton, My damn Shovelhead chop
more YZF750R's, the KZ's, a Zephyr750...and the unfinished 75' CB550 cafe.
--

Offline 1fasgsxr

  • Posts: 1338
Re: 1998 Gsxr 750 build
« Reply #75 on: Apr 14, 2018, 06:16:07 »
I am just sanding them. I actually built a small powder oven for this exact reason...wheels.
I cant seem to get it to work for some stupid reason. I need to get it going otherwise I just wasted money on something....again..lol.  I may end up changing wheels at some point so Im not going to invest a lot of time and money in these stockers.

Offline 1fasgsxr

  • Posts: 1338
Re: 1998 Gsxr 750 build
« Reply #76 on: Apr 21, 2018, 20:58:45 »
Got them in primer

Offline 1fasgsxr

  • Posts: 1338
Re: 1998 Gsxr 750 build
« Reply #77 on: Apr 22, 2018, 21:34:24 »
Cleaning up some front rotor bolts

Offline crazypj

  • Posts: 12780
  • Split personality, I fake being smart
Re: 1998 Gsxr 750 build
« Reply #78 on: Apr 22, 2018, 21:41:13 »
Is that the sprocket carrier? (last pic)
If so, looks like the bearing/axle spacer sleeve is missing?
'you can take my word for it or argue until you find out I'm right'
Best thing I ever overheard
"yep, PJ's my boss, he taught me everything I know, just didn't teach me everything he knows"
Brian Morgan, 1982

CB360's,  http://www.dotheton.com/forum/index.php?topic=11736.0
XS650,  http://www.dotheton.com/forum/index.php?topic=11922.0