Hi, my bike is a '75 Honda CB360T.
My turn signals stop working after about 15 minutes or so of riding and using them. I'm running the stock turn signals although I shortened the original posts. When I replace the turn signal relay they work again for a short period of time, then stop working. I've replaced the relay twice now, using the 12v rectangular kind, 1 from Old Bike Barn and 1 from Common Motor.
I believe the turn signals were fine prior to a handle bar switch I had a friend do. He removed the headlight during the process and disconnected all the wiring inside the bucket. Wondering if something was missed during re-connection, like proper grounding or wrong connection, although the blinkers worked for a while after the bar installation so that seems to indicate everything was reconnected properly, but I'm not sure (I'm a first time/just learning/do-it-yourself'er mechanic).
Currently when I switch on the turn signal, it doesn't work and I can feel the relay switch getting warm after about 15 seconds or so. Not sure how significant that is but wanted to mention.
That's about all the history and details I can think of. Any help is greatly appreciated!
My turn signals stop working after about 15 minutes or so of riding and using them. I'm running the stock turn signals although I shortened the original posts. When I replace the turn signal relay they work again for a short period of time, then stop working. I've replaced the relay twice now, using the 12v rectangular kind, 1 from Old Bike Barn and 1 from Common Motor.
I believe the turn signals were fine prior to a handle bar switch I had a friend do. He removed the headlight during the process and disconnected all the wiring inside the bucket. Wondering if something was missed during re-connection, like proper grounding or wrong connection, although the blinkers worked for a while after the bar installation so that seems to indicate everything was reconnected properly, but I'm not sure (I'm a first time/just learning/do-it-yourself'er mechanic).
Currently when I switch on the turn signal, it doesn't work and I can feel the relay switch getting warm after about 15 seconds or so. Not sure how significant that is but wanted to mention.
That's about all the history and details I can think of. Any help is greatly appreciated!